12 results
Narrow down by category
The cable is attached to the microphone, but the connector is XLR female and cannot be connected. [SONY / C-38B] Product Questions
XLR male-XLR male cables are available from CANARE.Please use this.
When inputting to unbalanced RCA, is it output from balanced XLR? [KRK] Product Questions
It is also output from XLR, not only from unbalanced RCA.
Is the long cable that is only connected to the first terminal on the NT1-A XLR a defect? [RODE / NT1A] Product Questions
Since the cable reduces shock noise, the first pin in the GND is supposed to be long and it is not
How can I supply the power to a gooseneck microphone? Product Questions
as a microphone preamplifier or mixer, with an XLR cable. If you cannot supply from the mixer
When testing the continuity of a phone plug, SHORTED or INTERMITTENT displays on the screen. [BEHRINGER / CT200] Product Questions
XLR side and the pin 3 (Ring) on the phone side as shorted even though they have not actually shorted
How can I connect multiple CSL4/8II speakers? [CLASSIC PRO] Product Questions
cable. Then, connect the RS-485 OUT on the 1st one and the RS-485 IN on the 2nd one with an XLR male-XLR
Can a bass amp be connected to a PA system? Product Questions
If your amplifier has a LINE OUT or XLR output, you can connect it directly to the PA.If not, you
Does not pick up the sound. Product Questions
be stable or may not work.-Use an XLR (cannon type) type male-female cable.
The cable connected to the NT1-A looks like its going to fall out [RODE / NT1A] Product Questions
On the NT1-A, the XLR terminal the screw has become loose. It is possible to use a screwdriver to
Where should I connect phantom power when using a condenser microphone? Product Questions
Between the microphone and the mixer.Please use a connection cable with XLR terminals on both