DOEPFER / A-140-2V Dual Micro ADSR

Variations

The A-140-2 Dual Mini ADSR is a module that contains two ADSR envelopes in an 8HP.

Each envelope has the following controls and inputs/outputs.

LED display (display of envelope output)
A : manual attack control
D : manual decay control
S : manual sustain control
R : manual release control
Gate input
Retrigger input
CVT input with attenuator (CVT = CV Time)
Envelope Output 1
Envelope Output 2
The output CV range of each envelope is 0 to 10V.

The settable attack/decay/release time range is from approx. 1 ms to 30 sec.

Option
・The settings of the two internal jumpers on each subunit can be changed to select which parameters are controlled by the CVT input (e.g., D + R only or A only or A + D + R). （), and whether turning up the CVT lengthens or shortens the CVT time (e.g., D + R only or A + D + R only or A + D + R only).

The CVT jack is connected to an internal fixed voltage; all time parameters (ADR) can be controlled simultaneously using the CVT control.

The envelope output 2 can be set to either a normal envelope or an inverted phase envelope by setting the jumper.

Envelope 2 can be connected to Envelope 1 (Envelope 2 is also triggered by Gate 1) by setting a jumper.

Jumper settings can be made for each subunit to connect from the gate signal bus of the bus board to each envelope.

Width 8HP
Depth 40mm
Current consumption
+12V : 50mA
-12V : 40mA