From our CLASSIC PRO, which delivers attractive items that everyone wants at an overwhelming price, the monitor speaker stands MST2 and MST3 are now available. I wanted to hide what I wanted, but I hadn't handled it so far, so I started selling it as I wanted.
The first desire is that the size of the top plate does not have to be that large. Since the width and depth of small studio monitor speakers used at home are narrow, the size of the installation surface was set to 180mm x 225mm in consideration of the size that fits perfectly.
JBL 305P MKII 185 x 231 mm
YAMAHA HS5 170 x 222 mm
TANNOY Reveal402 147 x 212 mm
TANNOY Reveal502 184 x 238 mm
SAMSON MedeiaOne M50
SAMSON Resolv SE5
The second desire is "I want to adjust the height".
Many desktop type monitor speaker stands have a fixed height, so it was not possible to achieve a good height as it was, and some people had to put something such as a block underneath. Both MST2 and MST3 can be adjusted in 5 steps (20 mm width) between height: 285-365 mm. Also. Since there is a fall prevention pin, it is easy to match the height on the left and right.
The third desire is "I want to turn around."
If you want to turn it sideways, you can turn the stand sideways together with the conventional type, but I thought it was not good to move the base part together. In that respect, MST2 and MST3 can turn the columns, so the dissatisfaction is cleared.
The fourth desire is "I want to use the desk widely".
I was worried that the base type table stand would require as much installation space as the top plate on the desk, and that if I wanted to change the angle, the available space would become smaller. The clamp type MST3 can be installed in a small space and maximizes the effective use of the desk. Since the support is attached to the edge of the top plate instead of the center, it can be installed at the back of the desk.
The fifth and final desire is to change the "angle of the top plate".
There is also a way to use an isolation pad with angle adjustment, but I thought that if there was only a horizontally fixed stand, it might not be the best angle depending on the installation environment. MST2 and MST3 can be angled downward, and since they have stopper screws, there is no need to worry about accidentally dropping them.
What a shocking price for such a perfect monitor speaker stand. You can get a big effect with a small investment !!
With the correct installation of studio monitor speakers, you will be able to hear more reliable sound in a better environment. If you don't have a speaker stand yet, please try using CLASSIC PRO / MST2 and MST3.
For the correct installation method, see [To hear more accurate speaker sound] on the [Choose Studio Monitor Speakers] page.