ここから本文です

Is it possible to disable standby mode on the 1 series 104-BT? [JBL]

Standby mode can be disabled.

[How to Disable/Re-Enable Standby Mode]
■Disable
1. Turn off the power switch.
2. Connect the headphones to the headphone output.
3. Set the VOLUME knob to the minimum.
4. Turn on the power switch and complete the following steps within 15 seconds.
　1. Disconnect the headphones.
　2. Reconnect the headphones.
　3. Disconnect the headphones again.
　4. Reconnect the headphones again.
5. If completed correctly, the indicator on the VOLUME knob will flash rapidly 5 times.
 
■Re-enable
1. Turn off the power switch.
2. Disconnect the headphones to the headphone output.
3. Set the VOLUME knob to the minimum.
4. Turn on the power switch and complete the following steps within 15 seconds.
　1. Connect the headphones.
　2. Disconnect the headphones.
　3. Connect the headphones again.
　4. Disconnect the headphones again.
5. If completed correctly, the indicator on the VOLUME knob will flash slowly twice.
 
[Standby Mode]
If the low signal lasts for about 19 minutes, standby mode will be active and the sound stops. It will be inactive when a loud volume is input.
 

Was this information helpful?