ここから本文です

Software does not recognize the speaker. [CLASSIC PRO]

The procedure to have the PC detect the speaker is as follows.

  1. Download the software from the attached CD-ROM or product page.
  2. Comunications→select Serial Ports Configuration. Select one of Com1-6 and press OK.
  3. Comunications→select Enable Communications to open the Select page.
  4. Select one of "Read Program Data From Device" or "Write Program Data To Device" to complete the detection.
    *If the Select page in the 3. above is not displayed, change the Com number and repeat 2. and 3. until the Select page opens.

Was this information helpful?