Many people own a camera but do not have a camera case. While there are many such people out there, there are a few who actually do want a camera case, but cannot choose one because there are too many cases out there. For those people, I would like to introduce our camera cases in soft and hard categories.
↓I will introduce the following two products this time.
VSGO / V-BP01 Camera Backpack Black Snipe
Let's get started with the 3i-2215-8DL hard case.



From the front and left to right. Just by looking at the outside, you can tell that the SKB resin case is sturdy. It is also dustproof and waterproof. I'll get more into the details later, but let's take a look at the inside.

Open the four catch locks and lift up the lid like this. First, let's look at the lid part…

There is plenty of storage space behind the lid. The storage area is a translucent mesh, and although it looks like only four places, there are more storage spaces if you peel off the Velcro at the top as shown below. The storage area is not very thick, but it can hold enough camera accessories and small items. It may be just right for storing batteries and things of that sort.



Now let's move on to the inside.

The case has a solid form inside. Of course, the partitions inside can be rearranged according to what you need to store.

The partitions are attached with Velcro tape and can be removed. I was worried about the strength of the Velcro, but the Velcro is quite strong and does not come off easily. As one can expect with SKB.

By the way, some of you may have been wondering, but the entire internal foam can be removed from the case like this. I think it is good to use the foam for storing cameras and precision instruments, and remove the foam for storing other cables and tools.


Just to mention one small detail, this camera case has casters attached to the case, and the casters are slightly embedded into the interior of the case. Of course, this part where the wheels are is designed with the foam slanting at one corner so that it does not feel uncomfortable when the foam is placed in the caster part.

This is the thickness of the foam. It has cushioning properties, but it is approximately 1.4 cm. I think the thickness is generally sufficient.


Next, let's look at the outside of the case. It comes with a handle that can be pulled out like a carrying case. You can pull it out by pressing the red button in the upper right corner.

By the way, the height with the handle pulled out is about 98.5cm.

These are the wheels. They move smoothly and are sturdy.


Lastly, I actually put my equipment in the bag. It is very good that it is deep enough to hold a lot of equipment and that I can arrange the partitions according to the shape of my camera and equipment. Anyhow, It was a sturdy and secure hard case for a camera.
Now, let's move on to the soft case. This time we will look at VSGO's backpack type "V-BP01.



For now, my first impression is that the design is stylish! It is soft and svelte to the touch. By the way, I wondered how to open this... and I touched the part that looks like it...

I touched the part that looked like it... and found that it was designed to be opened by turning this part in the direction of the arrow. However, this part...I can't tell you how good it feels, but it feels really good when you open it.
I think that by turning it, something like a stopper inside comes off and opens it. But since I couldn't figure out exactly how it works, it's difficult to put it into words, but I would like you to actually touch and feel it. I’m enjoying opening and closing it several times because it is a sensation that I have never felt before.

This is what it looks like when you open the top. It is hard to tell from the picture, but the interior has two tiers. The bottom part is made of Velcro tape, so it can be removed.



Now let's look at the back side. Open the top zipper, you will find a lot of storage space. The mesh lining seems to allow for good ventilation. By the way, I forgot to take a picture, but if you open the third bottom part, you can access the lower space inside. *I couldn’t tell you that at first because I thought it was just a storage space but when I went through it, I was surprised when I noticed it later.


This is the part on the lid side when the back is opened. It is held in place with a magnet.

When you open it, you will find another storage space. It is not very thick, but it might be good for a mobile battery.


Next is the side panel. There are many storage spaces here as well. This part might be able to hold a small tripod or something. By the way, at this time I did not know that you can access the lower compartment from the back of the case, so I wondered where I could open the case to look at it. Then, as I was looking for it...


There it was! It seems that one of the sides has a structure that allows you access to the interior.

By the way, it came with a very stylish and rich instruction manual, but I'll leave that for those who have actually purchased it.

As some of you may have suddenly noticed, an accessory rain cover (left) and a divider (right) were included and can be attached inside.

The inside was pre-installed with dividers. This can also be arranged according to the items to be stored.


The divider is attached with Velcro tape, so it can be removed when not needed. It looks good not only as a camera case, but also as a travel bag. So...



I actually had one of our employees use it. How does it feel? The design is even cooler when you actually carry it on your back and see it with your equipment in it. By the way...

To my surprise, as I am writing this blog, the VSGO camera backpack that I introduced to you just won the prestigious German design award, the Red Dot Design Award! From my point of view, as someone who has just had a chance to actually touch it, the result of this well-designed and functional backpack being selected for the award is a well-deserved nod. This camera case has received worldwide acclaim, and I hope that everyone will take a look at it and feel it for themselves.
Now that we have focused on camera cases in this introduction, what do you think? We also offer a variety of other camera cases, so please check them out if you are interested in them. We hope you will find your favorite camera case. Come back again soon.