Frequent inquiries we receive about wireless microphones ～SHURE～

This time, I have compiled a collection of questions we receive about Shure wireless system. If you have any questions, please contact me!!

Please use in combination with the same series. For example, in the case of SVX series, the combinations are as follows.

■ SVX series

Receiver：SVX4 or SVX88
Transmitter：SVX1, SVX2PG28, SVX2PG58

A number is added after the series model number. The numbers mean the following.
1・・・Belt pack transmitter
2・・・Handheld transmitter
4・・・Single Channel Receiver
88・・・Dual Channel Receiver
※There are some exceptions for higher grade models.

This is not limited to SHURE, but in general, wireless receivers have 1ch, 2ch, 3ch, and 4ch, and the number of transmitters that can be connected with one receiver is fixed.
In case of BLX series,
BLX4・・・1ch
BLX88・・・2ch

In the case of a wireless set that includes the BLX4 → 6 sets can be used in the same area. In the case of a wireless set that includes the BLX88 → 3 sets can be used in the same area. When using the BLX4 and the BLX88 in combination, there is no problem if the total number of receiver channels is 6 or less. ※However, there is no guarantee that you can use 6 waves. Please note that 6 waves may not be available depending on the radio wave conditions of the installation environment.

The input terminal of SHURE's belt pack transmitter is the TA4F (mini XLR 4 pin). We also asked whether other manufacturers' products can be used as long as they have the same shape, but the pin assignments may differ, so there may be no sound, or noise may occur even if there is sound. The SHURE belt packs are meant for SHURE microphones. We strongly recommend that you use them together.

Microphones with "TQG" as the last model number can be used with any belt pack regardless of the SHURE series. ※Some products in the list below do not include TQG, but they are supported.

⇒ List of headset microphones
⇒ List of Lavalier Microphone

If you buy more receivers or transmitters later, the firmware may be a different from the firmware version of the original product, in which case the problem will be resolved by updating the firmware. In addition to the wireless system itself, a computer connected to the Internet is also required to carry out the update. Download the update utility to your computer and connect the wireless system to your computer to update. For details, refer to How to use the update utility below.

■ How to use the SHURE update utility

■ Click here to download the update utility

https://www.shure.com/ja-JP/products/software/shure_update_utility

List of applicable model numbers for old standard specified low power wireless devices

Please refer to my previous blog for how to find the verification number.
⇒ Story about spurious standards of wireless microphone

So, how was it? If you have any further questions that have not been covered, please feel free to contact us. m(..)m Let's meet again with another brand.