RODE / NT55

Equipped with 3-position low cut and pad switches on the main unit to flexibly support various sound sources. Directivity can be switched with the included capsule.

[直輸入品][Direct Import]

＜Specifications＞
■ Condenser microphone
■ Directivity: Unidirectional, omnidirectional capsule switching type
■ Acoustic method: External polarization type, 1/2" (13mm) pressure gradient condenser
■ Frequency characteristics: High pass filter selectable from 20 Hz to 20,000 Hz
■ 75 Hz, 150 Hz / 12 dB / octave
■ Output impedance: 100 Ω
■ S / N ratio: 79 dB (1 kHz rel 1 pa; per IEC651, IEC268-15)
■ Equivalent noise: 15 dB SPL (per IEC651, IEC268-15)
■ Maximum SPL: 136 dB (@ 1% THD into 1kΩ)
146 dB (@ 1% THD into 1kΩ) Pad -10
156 dB (@ 1% THD into 1kΩ) Pad -20
■ Sensitivity: -38 dB re 1 Volt / Pascal (16 mV @ 94 dB SPL) +/- 2 dB
■ Maximum output voltage: 8 dBu (@ 1% THD into 1kΩ)
■ Dynamic range: 121dB (per IEC651, IEC268-15)
■ Power supply: 48V (P48), 24V (P24) phantom power
■ Output terminal: 3-pin XLR balanced output (2nd hot, 3rd cold)
■ Weight: 110g (microphone only)
■ Size: 145mmXΦ20mm
■ Low cut switch ■ 75Hz, 150Hz
■ 0, -10dB switchable PAD
■ NT45-O / NT45-C capsule
■ Stand mount, omnidirectional capsule included

*　NOTE: PIN 1 on Rode XLR connectors is longer than the other two pins. This is to ensure that the Ground Pin (PIN 1) makes first contact when inserting the XLR plug into the socket, protecting the microphone from electrostatic shock which can cause damage to internal circuitry.