RODE / NT55

The unit is equipped with a three-position low cut and pad switch, allowing for flexible use with a variety of sources. The directivity can also be changed using the included capsule.

[直輸入品][Direct Import]

■Condenser Microphone
■Directivity: Cardioid, Omnidirectional, Switchable Capsule
■Acoustic Method: Externally Polarized, 1/2"" (13mm) Pressure Gradient Condenser
■Frequency Response: 20 Hz to 20,000 Hz, Selectable High-Pass Filter @ 75 Hz, 150 Hz / 12 dB/Octave
■Output Impedance: 100 Ω
■S/N Ratio: 79 dB (1 kHz rel 1 pa; per IEC 651, IEC 268-15)
■Equivalent Noise: 15 dB SPL (per IEC 651, IEC 268-15)
■Maximum SPL: 136 dB (@ 1% THD into 1 kΩ)
146 dB (@ 1% THD into 1 kΩ) Pad -10
156 dB (@ 1% THD into 1 kΩ) Pad -20
■Sensitivity: -38 dB rel 1 Volts/Pascals (16 mV @ 94 dB SPL) +/-2 dB
■Maximum Output Voltage: 8 dBu (@ 1% THD into 1 kΩ)
■Dynamic Range: 121 dB (per IEC651, IEC268-15)
■Power Requirements: 48 V (P48), 24 V (P24) with phantom power
■Output Connectors: 3-pin XLR balanced output (pin 2 hot, pin 3 cold)
■Weight: 110 g (microphone only)
■Dimensions: 145 mm x Φ20 mm
■Low-cut switch: 75 Hz, 150 Hz
■0, -10 dB switchable pad
■NT45-O/NT45-C capsule
■Stand-mountable, omnidirectional capsule included



Note: On RODE XLR connectors, pin 1 is longer than the other two pins. This is intended to ensure that ground pin 1 makes contact first when inserting the XLR plug into a socket. This protects the microphone from static electricity shock, which can damage the internal circuitry.