YAMAHA / EAD10 Drum module

A sensor unit that integrates an XY type stereo condenser microphone and a trigger unit that converts the vibration of the drum into an electronic signal.The sensor unit can be easily installed and expands the possibilities of practicing acoustic drums, recording, and playing. A powerful item.

■ Set contents:
・Main unit (sound source section)
・Sensor unit (trigger microphone)

Main unit：
■ Dimensions:
Width: 260mm
Height: 63mm
Depth: 138mm
■ Weight: 654g
■ Tone generator
・ Number of scenes: Preset: 50 User: 200
・ Number of reverb types: 11
・ Number of effect types: Microphone: 21 Trigger: 10
・ Trigger tone
■ Sound source method: AWM2
■ Maximum polyphony: 64
■ Number of voices: 757
■ Recorder: Recording time
■ Built-in memory: about 1 minute 30 seconds
■ USB flash memory: about 30 minutes / file
■ Format
Recording / playback: WAV (44.1kHz, 16bit, stereo)
■ Wave
・ Readable wave number: Up to 100
・ Playback sampling rate: 44.1kHz
・ Wave memory: 32 MB
・ Maximum readable sample size: 1 mono sample: 1.75 MB, 1 stereo sample: 3.5 MB
・ Sample format: WAV (16 bit)
■ Click
・ Tempo: 30-300 BPM, tap tempo function
・ Beat (beat): 1/4 to 16/4, 1/8 to 16/8, 1/16 to 16/16
・ Timing: Accent, quarter note, eighth note, sixteenth note, eighth triplet
■ Other functions: Trigger sensitivity adjustment, USB audio / MIDI, headphone EQ

Sensor unit:
■ Dimensions
Width: 76mm
Height: 88mm
Depth: 78mm
■ Weight: 464g
■ Connection terminal
・ Sensor output: For trigger sensor / A (standard phone terminal), For microphone sensor
■ Connection terminal: DC IN (12V), PHONES (stereo standard phone terminal), AUX IN (stereo mini terminal), OUTPUT L / MONO, R (standard phone terminal), USB TO DEVICE, USB TO HOST
■ Sensor input
・ for microphone sensor: B (Stereo standard phone terminal)
・ Trigger input: Stereo (L: trigger, R: trigger) / ①KICK / ② (also serves as A), ③SNARE / ④ (stereo standard phone terminal), 3 zones (L: trigger, R: rim switch): ⑤, ⑥ (Stereo standard phone jack)
■ Pedal: FOOT SW (stereo standard phone terminal)
■ Connection terminal: For trigger sensor: A (stereo standard phone terminal) B (stereo standard phone terminal)
■ Sensing method
・ Microphone: High sound pressure resistant microphone x 2
・ Trigger: Bass drum only x 1

■ Accessories
Instruction manual, warranty card, power adapter (PA-150B), module holder, wing bolt for module holder (2 pieces), connection cable (1 set), cable band (3 pieces), cushion seal (2 pieces) )