Headphones / Earphones
WIRELESS BLUETOOTH
Wireless headphones
CLASSIC PRO/CPH7000BT CHH20 Headphone Hanger Set

CLASSIC PRO / CPH7000BT CHH20 Headphone Hanger Set

Variations

A great value set that includes the CPH7000BT closed-back monitor headphones, which can be used both wired and wirelessly, and the CHH20 headphone hanger, which can hold two pairs of headphones!

■ Introducing a wireless model of the classic CLASSIC PRO monitor headphones, the CPH7000! The CPH7000BT is a wireless headphone developed to meet the needs of engineers and musicians, offering both wireless and wired compatibility. Supporting Bluetooth 5.4 and SBC/AAC/aptX/aptX HD/aptX adaptive codecs, these headphones deliver high-quality audio even when connected wirelessly. The included audio cable allows for wired connection to audio equipment such as mixers.

■ High-Performance Diaphragm
・Equipped with a high-performance diaphragm carefully designed to deliver superior sound quality. It delivers balanced, high-resolution sound from low to high frequencies, ensuring high-quality audio even when connected wirelessly.

■ Bluetooth Version 5.4 Compatible
・Compatible with Bluetooth version 5.4. Low power consumption and fast transfer speeds improve sound quality during wireless transmission.

■ SBC/AAC/aptX/aptX HD/aptX adaptive codec support
・Supports SBC/AAC/aptX/aptX HD/aptX adaptive codecs. Enjoy the high-quality sound of the CPH7000, which has earned rave reviews from countless users, even with a wireless connection.

■Large-diameter ear pads for a comfortable fit
- The large ear pads are thick and cushioned, providing a comfortable fit and excellent sound insulation that effectively reduces ambient noise.

■Audio cable for wired connection
- The CPH7000BT also comes with an audio cable. It can be used with a wired connection to audio equipment such as mixers.

■ Features a stereo mini plug and a standard phone plug adapter.
■ Features a convenient single-sided cable.

■ Specifications
・Wireless monitor headphones
・Type: Dynamic, closed-back
・Driver unit: 40mm, neodymium magnet
・Impedance: 64Ω
・Frequency response: 10-30,000 Hz
・Sensitivity: 118 dB/mW @ 1kHz
・Bluetooth version: 5.4
・Bluetooth codec: SBC/AAC/aptX/aptX HD/aptX adaptive
・Maximum playback time: Approximately 30 hours
・Charging time: Approximately 2.5 hours
・Maximum range: Approximately 10 meters
・Plug shape: 3.5mm (6.3mm stereo adapter included)
・Weight: Approximately 295g (excluding cable)
・Accessories: Audio cable (straight, approximately 2.2m), adapter, USB Type-C cable

※ The LED will turn off once charging is complete.
Even when connected via Bluetooth, the device will automatically turn off if there is no operation or sound output for approximately 10 minutes.

When the battery level reaches approximately 20%, a warning beep will sound three times approximately every 50 seconds.

How to Charging

- Please charge the device before using it for the first time.
- The charging time required for a full charge is approximately 2.5 hours (varies depending on usage conditions).
- Always use the included USB charging cable when charging.
- Charging may not work with cables other than the included USB charging cable.

1. Connect the included USB charging cable (USB Type-C end) to the USB Type-C charging jack on this device.

2. Connect the included USB charging cable (USB Type-A end) to your computer to charge.

While charging, the battery LED will light up as shown below.
Red: Charging
Off: Charging complete
3. After charging is complete, disconnect the USB charging cable (USB Type-A end) from your computer.
4. Disconnect the USB charging cable (USB Type-C end) from the battery jack of this product.

- The CLASSIC PRO/CHH20 is a clamp-type headphone hanger that can hold two headphones. It can be placed horizontally or vertically on the ground, making it suitable for use in a variety of locations, such as at home or in a studio.
- The two-pronged hanger allows you to hang up to two headphones.
- The foldable hanger prevents it from getting in the way while working at a desk.
- The hanger base is detachable. It can be placed horizontally or vertically on the ground, such as on the edge of a table or desk leg.
- The clamp part can accommodate headphones up to 40mm thick.
- Weight: Approximately 150g
- Clamp width: Up to 40mm