SEQUENTIAL（Dave Smith Instruments） / Take 5 Module

TAKE 5 is a compact and powerful VCO/VCF-based 5-voice analog polyphonic synthesizer.

Sequential introduces Take 5, a compact and powerful 5-voice analog polysynth. Each voice features two analog oscillators and a 4-pole analog filter straight out of the Prophet-5. Take 5 is designed to be a small, lightweight, mobile machine (width: 63 cm, weight: 7.7 kg) that can be easily played anywhere, without sacrificing playability. The new low-split design is a perfect match for the new Take 5. The newly adopted low-split function splits the keyboard in two, allowing you to transpose the low
notes two octaves down to create a fat bass line, and play chords on the high notes, transcending the limits of the 44-key keyboard! Despite its affordable price,
is fully equipped with advanced modulation matrix, 64-step sequencer, two digital effects, and other features necessary for modern sound creation.

Oscillators
- Two analog VCOs per voice
- Continuously variable waveshapes per oscillator (sine, sawtooth, variable width pulse)
- Hard sync : Sync from oscillator 1 to oscillator 2
- Square wave sub-octave generator (oscillator 1) per voice Switchable keyboard tracking ON/OFF for each oscillator
・Front panel FM (Frequency Modulation)

Mixer
・Oscillator 1 amount
・Oscillator 1 sub-octave amount
・Oscillator 2 amount
・White noise/pink noise amount

Low-pass filter
- 4-pole resonant low-pass filter designed based on Prophet-5 Rev4 per voice
- Filter can be self-oscillating when resonance control is raised
- Bipolar filter envelope ammount

Two 5-stage envelope generators (ADSR + delay) with variable routing (filter, amplifier, and oggeration)
- Velocity modulation for each envelope mount
- Envelopes can be freely assigned to multiple destinations Envelopes can be freely assigned to multiple destinations

Low Frequency Oscillator
- 5 waveforms (triangle, sawtooth, inverted sawtooth, square, random (sample & hold))
- Clock sync (internal or external MIDI clock)
freely assignable to multiple destinations

Digital effects
- 1 dedicated reverb - damping, pre-delay, decay and tone controls
- 1 multi-effect - stereo delay, BBD delay, tape delay, chorus, flanger, phaser and ring modulator, Vintage rotary speaker, distortion, high-pass filter
・Dedicated overdrive effects

Vintage knob
・Recreate vintage synthesizer characteristics by changing parameters for each voice

Aftertouch
・Source : channel (mono) aftertouch with bipolar mounting
・Aftertouch can be freely assigned to multiple destinations

Clock
・Tap tempo capable master clock
・BPM control can be displayed on the display
・MIDI clock sync

Arpeggiator
- Up, down, up + down, random, assign mode
- Sync to MIDI clock
- Arpeggiations can be re-latched

Sequencer
- Polyphonic step sequencer - up to 64 steps, programmable for ties and rests

Performance Controls
- Full-size, semi-weighted, 3.5-octave high-quality Fatar keyboard - velocity and aftertouch included
- Pitch wheel with built-in springs - selectable range per program - separate wheel ranges for up and down
Low split mode - 2 independent performance zones for different octave ranges
- Hold switch - Latch pressed notes
- Polyphonic glide (portamento)
- Unison (monophonic) mode - Any number from 1 voice to all 5 voices Factory switch: When off, the front panel goes into live mode and all current knobs and switches are applied as they are.

Patch memory
・User x 128, Factory x 128

Input/output
・MIDI IN x1, MIDI OUT x1, MIDI THRU x1,
・USB port for bi-directional MIDI communication between computer and TAKE 5
・Sustain/footswitch input x1,
・Expression pedal input x1
・Main stereo output (1/4" phone jack x2) Main stereo output (1/4“ phone jack x 2)
Headphone output (stereo 1/4” phone jack)

Power supply
- IEC AC power inlet Built-in power supply
- Operates worldwide at 100V-240V AC 50-60Hz, maximum power consumption 14 watts

Dimensions: W 63.5cm D 32.4cm H 11.2cm
Weight: 7.7Kg
Accessories: AC cable, Japanese manual