BOSS / WL-60

The BOSS/WL-60 is a high-quality wireless guitar/bass system that has been designed to minimize sound delays and degradation in sound quality. It features a receiver with a large LCD display and a bodypack-type transmitter that can run for up to 25 hours. It's easy to check the status of all 14 channels and sync them. The compact size also makes it easy to install on a pedal board. You can play freely without being tied down by cables.

■ Wireless for guitar/bass
■ Receiver and transmitter set
■ Features
・High quality, stable connection with ultra-low latency
・Auto-scanning of 14 channels allows for quick and easy setup
・Receiver is equipped with a large LCD that displays the signal strength and battery level of each channel
・Receiver is designed to be the same size as a BOSS compact pedal, making it ideal for incorporating into a pedalboard
・Receiver uses a dual power supply method that can be powered by an AC adapter or two AA alkaline batteries
・Receiver is equipped with an input terminal that supports a standard cable
・Equipped with a DC out terminal that can supply power from the receiver to other pedals *1
・Includes a WL-60T transmitter. Additional transmitters can be added for backup purposes, etc.

- Bodypack type transmitter allows connection to any instrument

- Transmitter can be powered by two AA alkaline batteries and can be used continuously for up to 25 hours

- Transmission range covers up to 20m *2

- Comes with a 60cm high quality cable to connect the transmitter to a guitar/bass

■ Main specifications

[Receiver]

- Wireless communication format: Digital audio using BOSS's proprietary method

- Wireless carrier frequency: 2.4GHz

- Number of channels: 14 (varies depending on the conditions of the location of use)

- Transmission range: 20m line of sight (varies depending on the conditions of the location of use)

- Latency: 2.3ms

- Dynamic range: 110dB or more

- Frequency response: 20Hz to 20kHz

- Nominal input level: -10dBu

- Input impedance: 1MΩ

- Nominal output level: -10dBu

- Output impedance: 1k Ω
・Recommended load impedance: 10k Ω or more
・Controls: CH button, SCAN button, ENTER button, CABLE TONE button
・Indicators: Graphic LCD 64 x 32 dots
・Connection terminals INPUT terminal: Standard type, OUTPUT terminal: Standard type, IN terminal, OUT terminal
・Power supply: Alkaline battery (AA size) x 2, AC adapter (sold separately)
・Current consumption: 100mA
・Battery life during continuous use (varies depending on usage conditions): Alkaline battery: Approximately 7 hours
・External dimensions: 70 (W) x 120 (D) x 54 (H) mm (excluding rubber feet)
　　　　　　70 (W) x 120 (D) x 57 (H) mm (including rubber feet)
・Weight: 180g (excluding batteries), 220g (including batteries)
・Accessories: Instruction manual, ""Safety precautions"" leaflet, transmitter, guitar cable, rubber feet x 4, alkaline batteries (2 AA batteries, already connected to the unit), warranty card, Roland user registration card

[Transmitter (WL-60T)]

- Nominal input level: -10dBu (1MΩ)

- Controls: POWER switch, CH button

- Display: 7-segment 2-digit LED

- Indicator: POWER/BATTERY

- Connection terminal INPUT terminal: Standard type

- Power supply: 2 alkaline batteries (AA size)

- Current consumption: 110mA

- Battery life during continuous use (varies depending on usage conditions): Alkaline batteries: Approximately 25 hours

- External dimensions (including strap clip): 68 (W) x 88 (D) x 30 (H) mm

- Weight (including batteries): 120g

- Accessories: Alkaline batteries (2 AA size)

*1 If you want to power other pedals using the DC out terminal from the receiver, you will need to use an optional adapter (BOSS Please use a PSA-100S.
*2 Varies depending on the conditions of the location of use.