TC ELECTRONIC / FLUORESCENCE SHIMMER REVERB

Retro and cool reverb pedal TC ELECTRONIC ""FLUORESCENCE SHIMMER REVERB"". Equipped with four knobs. REVERB adjusts the length of reverberation, MIX adjusts the reverberation to be blended with the original sound, SHIMMER adjusts the ambient tone, and TONE adjusts the brightness. Subtle nuances can be created by turning the knobs. True bypass specification.

FLUORESCENCE SHIMMER REVERB is a reverb that literally specializes in shimmer effects reminiscent of Daniel Lanois and Brian Eno. Shimmer reverb adds a layer of reverberation sounds one octave above the original sound, creating a rich soundscape and a mysterious and sensual effect sound.

Used frequently by The Edge of U2, the shimmer effect is often used by shoegaze guitar players to create lively soundscapes and clear brilliance.

■Shimmer reverb pedal
■Controls
TONE: Adjusts the brightness of the reverb
Mix: Sets the amount of reverb to be blended into the dry signal.
REVERB: Adjusts the length of the reverb.
SHIMMER: Sets the pre-delay from the dry signal to the audible reverb effect.

■True bypass
Due to the true bypass design, it has no effect on the tone of the instrument when the effect is turned off. Clear sound is ensured.

■Spec
- Input: 1/4 inch mono standard phone
- Impedance: 470 kΩ
- Output: 1/4 inch mono standard phone
- Impedance: 1 kΩ
- Power supply: 9V DC, center negative
- Battery: 9V battery
*As this is a digital effect, the battery will drain very quickly. We recommend using a power adapter.
- Current consumption: 90mA
- Size: 58 x 74 x 132 mm
- Weight: 0.5kg