dbx / DBXVENU360-V

The DriveRack VENU360 is a PA processor that handles all the signal processing required between the mixer and power amplifiers. It features 3 inputs and 6 outputs, digital input support, and a wizard function. Wireless remote control is possible using the dedicated app. The larger LED screen provides outstanding operability, and this latest model offers more flexible routing than the DriveRack PA2.

This unit is ideal for venues requiring advanced speaker management, regardless of size, from fixed installations like halls and theaters to touring PA systems.

■Key Features
- Equipped with a 3-input, 6-output configuration and two AES/EBU digital inputs. Internal routing and mixing functions allow for flexible support for a wide range of systems, large and small.

- Equipped with a wizard function that speeds up complex setup. Follow the on-screen instructions to achieve the optimal setup.

- Simply select the speaker and power amplifier model and configuration, and the unit automatically configures optimal settings for crossover, parametric EQ, polarity, limiter, output delay, and more. Available models include those from major manufacturers such as JBL Professional and AMCRON, and the list can be updated to the latest version.

- Equipped with most of the necessary audio output functions.
- Equipped with an Auto EQ function that automatically adjusts sound quality to suit the venue. It uses an optional RTA microphone to analyze the sound field and instantly determine the optimal speaker output level and frequency response. Auto EQ is inserted in the output processing stage, allowing optimal correction for each application.

- The 24-bit AD converter uses a proprietary ""Type IV"" method to expand the dynamic range.
The ""VENU360 Control App"" is available for wireless control using a tablet or PC. You can adjust the sound while walking around the venue and listening to the actual sound.

*To use the ""VENU360 Control App"" wirelessly, a Wi-Fi-enabled tablet or PC and a wireless router are required.

- Level meters, clip LEDs, threshold LEDs, and more can be monitored from the Control App.

■Audio Input
Number of Connectors: 3 (Connectors 1 and 2 are shared between analog and digital)
Analog Input
Number of Channels: 3
Connector/Type: XLR, Electronically Balanced
Impedance: 30kΩ
Maximum Level: +28dBu
Digital Input
Number of Channels: 4
Connector/Type: XLR, AES/EBU
■RTA Microphone Input
Number of Channels: 1
Connector/Type: XLR
Phantom Power: +48VDC
■Audio Output (Analog Output)
Number of Channels: 6
Connector/Type: XLR, Electronically Balanced
Impedance: 120Ω
Maximum Level: +22dBu
■AD-DA Conversion: 24-bit, 48/96kHz
■Internal Processing: 32-bit Floating Point
■Frequency Response: 20Hz to 20kHz (±0.5dB)
■THD+N 0.0025% (+4dBu, 1kHz, 0dB Gain)
■Dynamic Range 110dB (Unweighted)
■Power Supply AC100V, 50/60Hz
■Power Consumption 18W
■Dimensions (W x H x D) 483 x 44 x 199mm (excluding protrusions)
■Weight 2.6kg
■Accessories Rack mount screws (4 screws, 4 washers), power cord
■Tablet/Mobile Device Operating Environment
iPad
OS: iOS 7.0 or later
Compatible Models: iPad 2 or later
Android
OS: Android OS 4.0.3 or later
Compatible Models: 7-inch or larger tablets

■DELAY LENGTH: 0ms/0ft/0m - 1000ms/1127ft/343m

■About Factory Reset
・Soft Reset: Resets all settings except user presets to the factory default settings.
(1) While holding down the UTILITY button, turn on the unit. When the display shows ""SOFT RESET Release UTILITY button,"" release the UTILITY button.
(2) Press the WIZARD button to execute the reset. Press the UTILITY button to cancel.

- Hard reset: Resets all setting data to the factory default state.
(1) While holding down the STORE button, turn on the unit. When the display shows ""FACTORY RESET Release STORE button,"" release the STORE button.
(2) Press the WIZARD button to execute the reset. Press the STORE button to cancel.

※About the VENU360 control app (as of 11/28/23)
For iPads running OS15 or later, the screen may not display properly, with parts of the screen being cut off. While we are awaiting an update, please use the app on Android, Windows, or Mac at this time.

*About the VENU360 control app (as of 7/16/2024)
App version 2.0.7 has been released, and the above issue has been resolved.

*About the VENU360 control app (as of 6/2/2025)
For iPads, connection is not possible with OS18 or later. (CONNECT is displayed, but touching the app will display an alert indicating that connection is not possible.)
As we are currently awaiting an update, please use the app on Android, Windows, or Mac.

*A Japanese manual is not included. Please click ""Product Manual"" on the product page to check.