Fostex / 6301NB

The 6301NB is an active monitor speaker with a built-in power amplifier with a rated output of 20W. It uses a 10cm cone-type full-range speaker to deliver a stable sound.

The latest series of compact active monitor speakers, the 6301, has been used in broadcasting facilities and small-scale sound reinforcement for over 30 years.

■Features
●A built-in amplifier monitor speaker suitable for various audio monitors and small-scale sound reinforcement.
●Uses a 10cm cone-type full-range speaker to deliver stable sound.
●A built-in power amplifier with a rated output of 20W delivers stable sound despite its compact size.
●All ​​models feature a Class D (PWM) power amplifier. Compared to the previous model (6301B-H series), rated output has been increased from 10W to 20W while power consumption has been reduced. Eco-friendly design also includes a standby mode (compliant with the European ErP Directive).
●In standby mode, power consumption drops to less than 0.5W after approximately 25 minutes if the input signal level remains below a certain level. Instant recovery from standby to normal operation occurs when the input signal level exceeds a certain level.
● The playback frequency range has been expanded from the previous model's 80-13,000Hz to 70-15,000Hz.
● The power cable is an inlet type.
● The power supply uses a switching system, allowing for worldwide use. *The product warranty applies only when used in Japan.
● The width and height are the same as the previous model (6301B-H series), allowing for replacement without changing the installation location.
● The enclosure is made of robust die-cast aluminum.
● The optional wall mounting angle ""EB-6301"" can be used to allow for wall mounting and angle adjustment.

■Specifications
●Speaker Section
Enclosure Type: Sealed (Material: Aluminum Die-cast)
Built-in Unit: 1 x 10cm Cone-type Full-range Unit
Playback Frequency Range: 70Hz-15kHz
Sound Pressure Level: 85dB/W (1m)
Maximum Sound Pressure Level: 98dB
●Amplifier Section
Rated Output: 20W
Analog Input: Unbalanced: Φ6.3mm (1/4"") TS Phone, Input Sensitivity: -14dBV (0.2Vr.m.s), Input Impedance: 10kΩ or greater
T.H.D.: 0.05% (at 1kHz/1W output)
Residual Noise: -70dBV
●General
Dimensions: 120(W) x 189(H) x 120(D) mm (including maximum protrusions)
Weight: 2.22 kg
Power Supply: AC 100-230 V (50/60 Hz)
*Product warranty applies only to use in Japan.
Power Consumption: 10 W (Standby mode: 0.5 W or less / Complies with European ErP Directive)
Accessories: Power cable (2 m)

■Model Differences
[6301NB] Equipped with unbalanced analog input.
[6301NE] Equipped with balanced analog input (electronically balanced) and unbalanced analog input.
[6301NX] Equipped with balanced analog input (transformer type) and unbalanced analog input.
[6301ND] Equipped with AES/EBU digital input/through output and unbalanced analog input.