CROWN / XTi 2002

The CROWN (AMCRON) / XTi2002 is a power amplifier equipped with a high-performance DSP that can drive large speakers with high output performance. Various settings such as crossover, equalizer, delay, and limiter can be set on the LCD display. The dedicated software Band Manager 2 makes more advanced settings possible on a PC.

The "XTi 2002" is equipped with a high-performance DSP, and can execute various audio processing on a single unit without preparing a separate processor. The crossover slope can be freely selected from Butterworth (6,12,18,24,48dB / oct) or Linkwitz Riley (24,48dB / oct), and the frequency can be set to any value in 1Hz steps. Each channel also has a parametric EQ with 8 input points + 6 output points and a delay of up to 50 ms. In addition, a sub-harmonic synthesizer that synthesizes ultra-low frequencies based on the input signal and outputs powerful heavy bass is also installed.

Up to 49 DSP settings can be saved as presets in the main unit and recalled instantly, making setup quick and easy. Equipped with a convenient pink noise transmitter for checking the system. Detailed DSP settings and presets can be saved from HiQnet System Architect software on a USB-connected PC. HiTinet Band Manager software dedicated to XTi is also available. Up to 49 DSP settings can be saved as presets in the main unit and recalled instantly, making setup quick and easy. Equipped with a convenient pink noise transmitter for checking the system. Detailed DSP settings and presets can be saved from HiQnet System Architect software on a USB-connected PC. HiTinet Band Manager software dedicated to XTi is also available.

"XTi 2002" has an output performance that exceeds the class in a lightweight and compact body. Equipped with a high-efficiency switching power supply that generates less heat, and can output 1,000W + 1,000W in a 2Ω stereo and 2,000W in a 4Ω bridge mono. Drive large speakers with plenty of time. In addition, the Peak X Plus limiter, which allows detailed settings for threshold, attack, and release, maximizes output performance. It is also lightweight and easy to carry, making it ideal for temporary PAs.

The input signal of "XTi 2002" can be routed inside the main unit. A link terminal for splitting the input signal is also provided. The output prepared two terminals, a binding post and a speed controller. In addition, the front panel has a large backlit LCD display for recalling presets and DSP settings. A lock function that prohibits operation of the display is also provided. Additionally, the handle is integrated with the cast aluminum front panel for easy portability.

■ Specification
Stereo output (1kHz, THD0.5%): 2Ω 1,000W + 1,000W, 4Ω 800W + 800W, 8Ω 450W + 450W
Bridge mono output (1kHz, THD0.5%): 4Ω 2,000W, 8Ω 1600W
Frequency characteristics (20Hz-20kHz, 1W, 4Ω): + 0 / -1dB
SN ratio (1kHz or less, 8Ω, A weight): 100dB
Dumping factor (10Hz-1kHz): 500 or more
Input impedance: 20kΩ (balanced), 10kΩ (unbalanced)
Input sensitivity: 1.4V
Input connector: XLR
Output connector: Neutic 4P Speakon (NL4MP), binding post
Network connector: USB
Indicators: Signal, -10, -20, Ready, Clip, Thermal, Power
Power supply: AC100V, 50 / 60Hz
Power consumption (IEC60065): 1,225W
Dimensions (W x H x D): 483 x 89 x 311mm (from mounting surface)
Weight: 8.4kg