A line mixer that can mix eight stereo signals. CH1 is equipped with an XLR terminal for microphone input. In addition to two adjustable outputs for each, it also has an ST2 / AUX output and can be connected to an external effector. Recommended as a sub-mixer, as well as for stores, and installed systems.
■ Line mixer
・ 1U rack mount size
・ CH1 input can be switched between Mic / Line and equipped with trim
・ The specified input level of 8 channels can be switched between 4dB / -10dBV
・ Equipped with LED for overload indicator and signal indicator for each input
・ Each input channel can independently control the signal level sent to the ST 1 bus and ST 2 / AUX bus
・ The selection of ST 2 bus or AUX bus can be set for each input channel with the switch on the bottom panel.
・ Each output bus is equipped with a 4-dot output level meter
・ MONO switch on ST 1 bus and ST 2 / AUX bus output
・ Using the BUSS OUT terminal and MASTER BUSS IN terminal, it is possible to expand every 8 stereo channels.
・ Equipped with 1/4 inch (6.3 mm) and 1/8 inch (3.5 mm), 250 mW 250 mW headphone output terminals
・ Equipped with a ground lift switch that can turn on/off the signal ground and chassis ground of all channels at once
・ Easy fuse replacement
・ Dimensions: 482 (width) mm x 44 (height) mm x 280 (depth) mm
・ Weight: 3.8kg