EARTHQUAKER DEVICES / Barrows

<> The Barrows is a fuzz pedal that pays homage to one of the most sought-after vintage fuzz pedals, the original Tone Bender MKII, while adapting it for modern use. It's also EQD's first distortion pedal in a Jr. cabinet!

Of course, the heart of the Barrows circuitry is a meticulously selected NOS germanium transistor. This is an essential component for those seeking the tone of a Bender pedal, especially the MKII, and we believe vintage fuzz fans will also appreciate the result. It covers everything from light distortion to the distinctive midrange and texture of a Bender-style fuzz tone with powerful harmonics.

With compatibility with other pedals and other gear in mind, the Barrows output is phase-corrected and buffered. The powerful fuzz in this compact enclosure delivers ample output to push a tube amp, and its low noise level means it works seamlessly with other pedals.

The tone, size, and ease of use as a fuzz pedal set the Barrows apart from the mere Bender fuzz clones you've seen on the market until now.

■Controls
Level: Sets the output of the Barrows. At around 12 o'clock, you can set the signal to be equal to the input signal. The large output makes it ideal for pushing tube amps or other distortion pedals.

Attack: This is the magic of the Barrows. At low settings, it responds precisely to your dynamics, providing the same feel you'd get from a tube amp. Turning the knob up from there transforms it into an aggressive fuzz. It amplifies everything—thickness, texture, and sustain. The distortion changes across a wide range of tones, so keep that in mind when crafting your sound.

■Specifications
・Dimensions: 9.53 x 5.08 x 4.45 cm
・Current Draw: 10 mA
・Input Impedance: 10 kOhm
・Output Impedance: 100 Ohm
・Switch: The Barrows uses a true bypass switch.
・Power Supply
This product is powered by a 9V AC adapter with a 2.1mm center negative plug. We do not recommend using daisy chains or power adapters that do not use a transformer, as this may result in noise. Also, do not use a power supply exceeding 9V, as this may cause malfunction.