EARTHQUAKER DEVICES / Fuzz Master General

The Fuzz Master General is a redesign of the vintage Ace Tone Fuzz Master FM-2 by EQD, with modern use in mind.

The Fuzz Master General features a wide-ranging fuzz control from nearly clean to gritty fuzz, three clipping options, and a highly effective tone control. The clipping options significantly affect the fuzz's sound character, octave projection, and output level.

This reissue model features a Flexi-Switch, reimagining the beloved vintage, thick octave fuzz sound into a more modern effect.

- EQD recreates the Ace Tone Fuzz Master FM-2 sound.
- Completely handmade in the USA at EQD headquarters in Akron, Ohio, using through-hole construction.
- Three clipping options. Clipping significantly affects the fuzz tone, octave projection, and output level.

1) Germanium: A more open fuzz sound.

2) Silicon: A tight, compressed fuzz.

3) No Clipping: A clean octave with less distortion like ring modulation.
- The original's footswitch-controlled tone has been replaced with a standard tone control. Equipped with an electronic relay-type flexiswitch

■SPECS
- Current consumption: 10 mA
- Input impedance: 15 kΩ
- Output impedance: <1 kΩ
- Dimensions: 121 x 64 x 57 mm