PLAYTECH / PRT1 Rack Tuner

<> Introducing the new rack tuner from PLAYTECH! With excellent visibility, you can always tune accurately. It also features a variety of mode switching and mute functions. It's also recommended for those looking for a rack tuner for the first time.

■Features
- Chromatic digital rack tuner
- Compatible with guitar and bass
- Standard pitch: 436 Hz to 445 Hz
- Tuning accuracy: ±1 cent
- Silent tuning with mute mode
- Fine tuning mode
- Normal mode and strobe mode
- Excellent visibility with LED display
- High-precision visual indication with 21 LEDs
- Silent tuning with footswitch (sold separately)
- 19-inch rack mountable (1RU)

■Controls
Front Panel
- INPUT 1: Input jack (phone) for connecting a guitar or bass.
- MUTE: Input jack (phone) for connecting a footswitch (sold separately). Pressing the footswitch mutes the output.
- MUTE button: Mutes the output. The LED lights when this button is active.
- CALIB: Calibrates the tuner.
- PRECISION: Adjusts the tuner's sensitivity. The LED lights up when this button is enabled.
・STROBE: Sets strobe mode.
・Meter display:
Tune so that the center ""0"" lights green. If a red LED lights up in the right area, the string is tuned a little sharp. If a red LED lights up in the left area, the string is tuned a little flat.
・Display: Displays the currently played note.
・#:
This LED lights up when the displayed note is a semitone higher. For example, if the display shows ""F"" and this LED is lit, the note being played is ""F#"".
・POWER: Main switch. Turns the unit's power on/off.

Rear panel
・SELECTOR SWITCH: Operating voltage selector switch. Set this to match the voltage you are using.
・OUTPUT: Output terminal (phone) for connecting an amplifier or effects device.
・INPUT 2: Input terminal (phone) for connecting a guitar or bass.

SPECS
POWER: IEC C14 power plug
INPUT1 & INPUT2: 2 x phone jacks
MUTE: 1 x phone jack
OUTPUT: 1 x phone jack
Calibration (reference pitch): 436 Hz to 445 Hz
Fuse: 5 mm x 20 mm, 100 mA, 250 V, slow blow
Mounting: 19 inches, 1U
Dimensions (W x H x D): 482 mm x 45 mm x 110 mm
Weight: 2.25 kg
Operating temperature: 0°C to 40°C
External MUTE switch: 1-pole switch (latching)