BLACKSTAR / TV-10-A Vacuum Tube Guitar Amplifier

Enjoy the nuances of 6L6 power tubes at home with the Blackstar TV 10-A 10W output tube amplifier!

■Natural tube overdrive tone for recording equipment and mixing desks
The TV-10 series is the successor to the Studio10 series. The “TV front” appearance gives the TV-10 A a classic amp feel, and the ECC83 vacuum tube in the preamp stage gives it a dynamic amp with extended highs and lows. The front panel or the included footswitch can be used to apply overdrive with rich overtones, allowing you to control everything from dynamic crunch to smooth, sing-songy legato.
Much of the distinctive character of single-ended tube amps comes from the clipping of the power stage, which brings out the nuances of the power tubes. the TV-10 A amp features 6L6 power tubes influenced by classic American amplifiers, giving it a characteristically bright clean sound With 10 watts of power to drive Celestion speakers, the TV-10 A is the perfect amp for home and studio practice, recording, and small live performances. The TV-10 A is the perfect amp for home or studio practice, recording, or small live performances.
Professional features such as a specially voiced reverb, footswitch, and effects loop enhance the sound experience, making this amplifier perfectly suited for today's demanding performance requirements.
Additionally, a cabinet-emulated line output is included to support silent practice, recording, and live sound in a PA. The signal from the emulated output is taken directly after the power amplifiers, reliably capturing and recording the tonal characteristics of the 6L6 power valves and saturated output transformers in Class A configuration.
About the Speaker Emulated Output
The Speaker Emulated Output emulates the tonal characteristics of a guitar speaker cabinet and provides a natural tube overdrive tone when connected to recording equipment or a mixing desk. (Note: When using this output, be sure to use a TRS/stereo
(Note: Always use a TRS/stereo shield when using this output).
The stereo jacks can also be used to connect headphones, allowing you to practice without any sound coming out of the speakers. (Note: For silent practice or recording, switch the amplifier to standby mode and silence the built-in speakers).

■Output: 10W
Tubes: ECC83, 6L6
Channel: Clean, Drive (footswitch selectable)
EQ: Tone
Reverb on board
Speaker-emulated line/headphone out
Series effect loop
Footswitchable: Channel switching/reverb
Footswitch: 2-way footswitch FS-4S included
Speaker: 1 x 12-inch Celestion
Size：473(W)×421(H)×251(D)mm
Weight: 14.7kg