Limetone Audio / JACKALMNACBF

A drive pedal that combines power and sound projection without crushing the sound of the instrument itself or the picking nuances. With two modes to switch between drive and preamp, it can be used in a wide range of situations.

recommended item

ASHDOWN / JLO-MEGADRIVE

限定特価 ¥21,800(incl. tax)

This is the second signature model for James LoMenzo, who has played with numerous bands in the hard rock and metal scenes. The BYPASS MIX and DRIVE MIX knobs allow you to adjust the blend between clean and distorted tones. The DRIVE knob controls the intensity of the distortion. Focusing on HP (210Hz-3KHz) and LP (100Hz-330Hz) while adjusting the distortion increases the depth and richness of the sound.

recommended item

ASHDOWN / ASHDOWN - 3S VU

¥29,800(incl. tax)

The Triple Shot, recommended for all bassists, is a unique overdrive pedal that splits your bass sound into three distinct frequency bands, each independently distorted. By adjusting the distortion level (ROAST) for each band, you can create complex tones ranging from subtle boosts to thunderous roars. This pedal transcends the ordinary distortion unit, unlocking infinite possibilities.

recommended item

ELECTRO-HARMONIX / BASS BM

¥13,800(incl. tax)

The Bass Big Muff, optimized for bass. Its simple operation makes it easy for beginners to handle, delivering the rich, heavy distortion sound of the Russian-made Big Muff. It also features a blend function to mix the effect sound with the original signal, allowing you to add powerful distortion while maintaining a thick, core-heavy sound. Recommended not only for bassists, but also for guitarists seeking thick, low-end tones.

This ADD CBF model is a version that adds the function of Clean Blend & Clean LPF (low pass filter), which allows you to add the low feeling and attack feeling of the original sound to the sound of JACKAL MIDNIGHT.

blend: Adjust the balance between JACKAL MIDNIGHT's sound and the original sound.
c-lpf: LPF of the original sound (a mechanism that passes through the low and cuts the high). By adjusting it, you can blend only the low component of the original sound.
c-vol: Adjust the volume of the original sound.

In normal mode, it is possible to produce a mid-gain to high-gain drive sound, and even if you increase the gain, the core of the sound will not be crushed, and even chords can be driven without destroying their resonance. By turning on the bright SW, you can add high frequencies that cannot be controlled with the treble knob.

Turn on preamp mode to switch to the mode where it operates as a preamp. Please set parameters such as gain and EQ again before using.

[Notes]
・Notes on recommended adapters and power supplies
https://limetoneaudio.com/prd_jackaldc.html
- If you turn the level knob past 12 o'clock, you may hear a rustling sound when you turn the knob, but this is not a malfunction and is due to specifications.

■Specifications
Connection terminal: INPUT, OUTPUT, DC9V In
Accessories: Instruction manual, warranty card
External dimensions: Width (W) 117 mm, Depth (D) 100 mm, Height (H) 56 mm
Weight: 380g
Input impedance: 1MΩ
Output impedance: 10kΩ or less
Current consumption: 56mA