EBS / DYNAVERBLSE

DynaVerb Limited Spring Edition is a reverb effect that simulates the natural reverberation of a variety of spaces, from vast concert halls to small rooms. Three new reverb types, Reversed, Gated, and Spring, have been added as special specifications, allowing you to enjoy a wide range of effects.

DynaVerb's transparent reverb adds depth and expressiveness to your performances, creating an immersive sound.

studio quality stompbox
DynaVerb Limited Spring Edition is a professional stereo reverb pedal. This is a multifunctional reverb pedal equipped with 3 new types of reverb: Reversed, Gated, and Spring, as well as 3 Hall and 3 Room reverbs.
The new DynaVerb lets you add studio-quality effects to any instrument, including basses, guitars, keyboards, and even vocals.

Easy operation
It's very easy to use. Use the REVERB knob to set the mix level of the wet signal (effect sound) and dry signal (input sound). The TONE knob adjusts the treble of the effect. Two switches in the center select the type of effect, and each type has three options (A, B, C) that you can use to customize your sound.
Please refer to the program matrix table for details.

parallel mode
24-bit digital circuitry provides outstanding sound quality on stage or in the studio. If necessary, you can set it to parallel mode by operating the switch on the pedal's board. The weight has been reduced from 400g of the previous Studio Edition to 245g.

■Specifications
Nominal Input Level? 8 dBv
Input Impedance 1 Mohms stereo 500 kohms mono
Dry Bandwidth +0 / -3 dB 20 ? 20k Hz
Reverb Bandwidth +0/-3 dB 20 ? 20k Hz
Tone Low Pass Filter min/max 1/20kHz
Reverb Types 3 Halls, 3 Rooms, and 1 Reversed, 1 Gated, and 1 Spring-type effect.
Sampling frequency 48kHz
Dynamic Range 107 dB A-weighted
Dimensions (L x W x H) 2.8 x 4.5 x 1.4″ (70 x 115 x 35 mm)
Weight 245g (0.54 lb.)
Bypass True Bypass
Power Requirements 9 ? 18 V DC Regulated, 80 mA max.** EBS recommends the use of the EBS AD-9 Pro DC adapter (not included).