FOCUSRITE / Scarlett Solo (gen. 3) speaker + condenser microphone set

伝統のISAプリアンプをエミュレートするAIRモードを搭載するオーディオインターフェイスScarlett soloとJBLの高音質モニタースピーカー、AKGのコンデンサーマイクが一緒になったお得なセット。これからDTMや「歌ってみた」を始めるビギナーの方におすすめ。

■Contents:
FOCUSRITE / Scarlett Solo (gen. 3) Audio Interface x1
JBL / 305PMKII x2
CLASSIC PRO / CSS030 x2
CLASSIC PRO / CPH7000 x1
AKG / P220 x1
CLASSIC PRO / MIX030 x1
CLASSIC PRO / CDA10B x1

○FOCUSRITE / Scarlett Solo (gen. 3) Audio Interface
The perfect audio interface for singer-songwriters. The simple Scarlett Solo G3 makes studio-quality guitar recordings easy and convenient.

The most compact interface in the Scarlett series. Many guitarists use Scarlett Solo to record studio-quality sounds. Direct monitor function allows for latency-free monitoring.

FOCUSRITE's SCARLETT G3 is an audio interface with a sophisticated look, excellent audio performance, and advanced connectivity.

Features
- Improved Scarlett 3rd Gen microphone preamps
- AIR function (NEW)
- High headroom for instruments input
- 1 balanced line input
- Balanced monitor output (NEW)
- Zero latency recording with direct monitoring function
- USB bus power
- High output headphone output
- Extensive included software
- 1 x USB C-A cable included
*Can be connected to a computer with a USB-A terminal
- 1 x microphone input (48V phantom power), 1 x INST input

■AIR MODE
Equipped with the ""Air"" function that emulates the analog frequency response of the ISA microphone preamp that made Focusrite famous. It is useful for recording vocals/instruments by placing the microphone close to the sound source.

■INTERACTIVE ONBOARDING
The INTERACTIVE ONBOARDING process provides an unprecedentedly comfortable startup.
When you connect SCARLETT to your computer, it is recognized as a storage device, and the onboarding process begins by opening the built-in disk image.
You can proceed to the guidance for downloading and setting up the software.
This allows beginners and experienced users alike to get started on music production faster than ever before.

■TYPE-C CONNECTIVITY
The SCARLETT G3 uses USB Type-C. A USB C-A cable is included.

■SUPER STABLE, LOW LATENCY USB DRIVERS
Dedicated drivers provide high stability and low latency on Windows PCs.

■Included software
The Scarlett G3 comes with Ableton Live Lite, a software that can be used indefinitely for all production methods, such as composing, recording, and editing, and is a package that allows you to start recording from the day you purchase it. In addition, Softube Time and Tone bundle and Focusrite Red Plug-in-Suite are also included. In addition, XLN Audio's piano sound source ""Addictive Keys"" is included free with all Focusrite audio interfaces. One full license per account is provided to existing and new customers.

■Bundle software/licenses
Ableton Live Lite
XLN Audio Addictive Keys
Softube Time and Tone Bundle
Focusrite Red Plug-in Suite
Focusrite Plug-in Collective
Three Month Splice Sounds Subscription

■Operating environment/specifications
・Supported OS
Mac OS10.12 or later
Windows 10 or later
*Internet connection is required for product registration/download of included software.

・Supported sample rates
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

・Inputs and outputs
1 microphone input, 1 line/instrument input, 2 main outputs (phones) *1 stereo system, headphone output

■Supported software operating environment
Please refer to the manufacturer websites below.

Please refer to the Abeleton Live Lite operating environment website.

Please refer to the Addictive Keys operating environment website below.

JBL (JBL) / 305P MKII

■Studio monitor
■5 inch
■LF41W/HF41W
■1 unit

＜Specifications＞
■LF driver: 127mm (5"")
■HF driver: 25mm (1"")
■HF driver type: soft dome
■Crossover: 1725Hz 4th order acoustic Linkwitz-Riley
■OK FOR USE NEAR
MAGNETICALLY SENSITIVE EQUIPMENT: Yes
■Input sensitivity: 92dB / 1m (-10dBV INPUT)
■Bi-amp
■Amplifier output
HF 41W, Class-D
LF 41W, Class-D
■Frequency response: (±3dB) 49Hz - 20kHz
■Frequency range: (-10dB) 43Hz - 24kHz
■Low frequency extension: (-10dB) 43Hz
■Maximum output sound pressure level: 94dB (continuous)
■Maximum output sound pressure level: 108dB (peak)
■Maximum peak input level: +6dBV / +20.3dBu (-10dBV / +4dBu)
■System distortion criteria: <10% THD at maximum output with full compressor / limiter engagement
■Electrical distortion criteria: 0.2% THD @ 1kHz / 2.83VRMS output; <1% THD @ 1kHz, full rated output
■Signal to noise ratio: 75dBA (A-Weighted), 70dBr (unweighted), relative to 2.83VRMS output
■Directional angle: 120° x 90° (HxV)
■Analog inputs: 1 x XLR, 1 x TRS phono
■HF trim control: -2dB, 0dB, +2dB
■BOUNDARY EQ LF Shelf @ 50Hz: -3dB, -1.5dB, 0dB
■Power supply: 100 - 240VAC (±10%), 50 / 60Hz
■Enclosure type: Ported
■Enclosure material: 15mm MDF
■Enclosure finish: Matte black PVC
■Baffle: Injection-molded structural ABS
■Cabinet dimensions WxHxD: 186×298×242mm
■Weight: 4.73 kg

〇CLASSIC PRO / CSS030

■Audio cable
■TRS phone-TRS phone
■3m

〇CLASSIC PRO / CPH7000

＜Features＞
■Ear pads that do not cause fatigue even when worn for long periods of time.
■Comfortable-fitting headband.
■Equipped with a high-quality diaphragm that does not compromise on sound quality.
■Uses a stereo mini plug. A phone plug conversion adapter is also included as standard.
■Uses a convenient single-ended cable.


■ Professional monitor headphones
■ Type: Dynamic closed type
■ Driver unit: 40mm neodymium magnet
■ Impedance: 64Ω
■ Frequency response: 10-30,000 Hz
■ Sensitivity: 108 dB/mW @1kHz
■ Maximum allowable input: 1,000mW
■ Cord length: Approximately 2.2m (OFC)
■ Plug shape: 3.5mm/6.3mm stereo (gold-plated)
■ Weight: Approximately 240g (excluding cord)

〇AKG (Archer Game) / P220

■Project Studio Line
■ Condenser microphone
■ Unidirectional
■ Frequency response: 20Hz-20kHz
■ Output impedance: 200Ω
■ Sensitivity: -35dBV re 1V/Pa
■ Maximum SPL: 135dB SPL (pad off, THD 0.5%)
■ Equivalent noise: 16dB SPL-A
■Output connector: XLR 3-pin (male)
■Power supply: Phantom DC48V, 2mA or less
■Pad switch: 0/-20dB
■Filter: Low cut Flat/300Hz (12dB/oct)
■Size/weight: Diameter 53mm, length 165mm, 525g
■Accessories: Holder with suspension, carrying hard case

〇CLASSIC PRO/ CDA10B

■Desk arm
■Tabletop microphone stand
■XLR cable 5m
■Arm: 50cm + 50cm
■Clamp: Width maximum 5cm, depth approx. 4cm
■Screw diameter: 5/8 (SHURE) inch
■There are two types of installation: clamp type and base fixed type (screws included)
■The angle of the arm can be adjusted with a spring without tightening the knob
■When used with a dynamic microphone, the weight may jump up slightly.