CLASSIC PRO / CLASSIC PRO PA set CSX15 pair + CPX2000

A great value set that combines CLASSIC PRO's recommended PA speaker CSX15 and stereo power amplifier CPX2000! The large 15-inch diameter produces deep low frequencies, and the high frequencies are clear from the high-grade driver unit, making this an attractive sound that is perfect for a variety of uses, including talk events, festivals, sports days, school events, singing and playing, band live shows, and DJ systems.

■CLASSIC PRO PA set
■PA speaker: CLASSIC PRO CSX15 x 2
■Power amplifier: CLASSIC PRO CPX2000

＜CSX15＞
A model that achieves the highest quality sound and high versatility.
Powerful, excellent sound quality and high portability make it suitable for a wide range of applications, from outdoor events to permanent installations.

■Type: 2-way full range
■Frequency response: 45Hz - 20kHz (-3dB)
■Maximum input power: 700W
■Impedance: 8ohms
■Output sound pressure level: 96dB
■Maximum output sound pressure level: 121dB
■Woofer unit: 15""""
■Driver: 1.7""
■Connector: Speakon x2
■Stand mount: Yes
■Dimensions: Width 46.0 x Height 78.0 x Depth 39.6 cm
■Weight: 26.8kg
■Notes:
■Equipped with a retractable floor monitor stand arm
■Nominal directivity angle: 90°H x60°V

This model features a powerful yet delicate sound thanks to the combination of a unique cabinet shape and high-grade driver and woofer. The lively and clear high range and tight yet sticky deep bass can flexibly accommodate any music genre. In addition, the full-range speaker is equipped with a convenient retractable floor monitor stand arm, allowing you to switch between uses with one touch. The lightweight resin cabinet is easy to carry and can be used in a wide range of situations.

＜CPX2000＞
The latest 700W model in the CPX series with the best cost performance. Although it has a lighter body than previous models, it is equipped with uncompromising parts. This achieves top-class powerful sound. In addition to a large toroidal transformer, a large heat sink, and a variable cooling fan, the latest SMD technology is used to achieve higher stability and reliability. It features clear sound with minimal distortion.

■Type: 2 channels
■Stereo output (4ohms): 990W
■Stereo output (8ohms): 700W
■Bridge output (8ohms): 1980w
■Frequency response: 20Hz-20kHz, +0-1dB
■Damping factor: >200
■Input terminal: XLR
■Output terminal: Speakon
■Power consumption: 433W (1/8POWER)
■Dimensions: W48.2xD22.7xH8.8 cm
■Weight: 14.5kg
■Others:
■Total harmonic distortion: <0.5%, 20Hz-20kHz
■Slew rate: >20V/us
■Voltage gain: 34dB
■Signal to noise ratio: >100dB, 20Hz-20kHz A-weighted
■Crosstalk: -75dB@1kHz, -58dB@20kHz
■Input sensitivity: 0.775V or 1.4V
■Protection circuitry: limiter, ON/OFF mute protection, output short circuit protection, DC protection, overheat protection, RF (radio frequency) interference protection
■Ventilation: front to rear
■Cooling: built-in heat sink, variable speed fan, thermal protection
■Amplification circuitry: Class H
■Power cable: approx. 1.6m, 2-pin

■Features
・Sophisticated black panel, 2U rack mount design
・Highly efficient heat sink and variable speed cooling fan to prevent the amplifier from overheating
・Large toroidal transformer that supplies high current
・Excellent signal conversion circuitry minimizes distortion Clear sound with minimal distortion

- Supports stereo, bridge, and parallel modes

- Independent signal and clip indicators for each channel

- Built-in limiter to protect speakers, ON/OFF mute protection, DC protection, output, short circuit protection, overheat protection, RF (radio frequency) interference protection

- Output mute to protect equipment when protection circuit is activated.

- Simple front panel design with only gain control

- Uses the latest SMD technology for higher stability and reliability

- Balanced XLR input/output, Speakon output

- Depth of 22.7 cm, can be stored in an effects rack

* Cables are sold separately. Please choose the length that suits your environment.