AER / Compact60/4

The Compact60/4 is the latest model of the classic Compact60/3 (BINGO2) for electric acoustic and jazz guitars. Although it is small, it has two-channel input terminals, digital effects, and can also be used with a vocal microphone. It features a clear, thick sound. It is a musical instrument amplifier loved by musicians all over the world.

■Acoustic guitar amplifier
■Amplifier output: 60W/4Ω
■Speaker: 8-inch twin cone speaker system
■Features
・The latest model of the standard Compact60/3 (BINGO2) for electric acoustic and jazz guitars
・A compact, powerful combo amplifier with simple operability that is suitable for all genres and instruments
・Suitable for stage, studio, and home use
・High sound quality and simple operability attract musicians around the world
・Equipped with an 8-inch twin cone speaker, it realizes dynamics control that fully utilizes the 60W output
■Controls
・EQ Ch1
　　color/ -3 dB at 700 Hz, +10 dB at 8 kHz
　　bass/ ±8 dB at 100 Hz (shelf type)
　　middle/ ±6 dB at 800 Hz
　　treble/ ±8 dB at 10 kHz (shelf type)
・EQ Ch2
　　bass/ ±8dB at 100 Hz (shelf type)

treble/ ±11 dB at 10 kHz (shelf type)

Effects 1 Reverb 2 Reverb with longer predelay 3 Delay (320 ms), 4 Chorus

Specifications

INPUT 1

Input terminal: 1/4 inch phone terminal

Impedance: 2.2 MΩ

Input sensitivity: 22 mV (-33 dBV)

HIGH/LOW switch (attenuator): -10 dB

Equivalent noise level A-weighted: 1.8 uV (-115 dBV)

INPUT 2

Input terminal XLR/1/4 inch phone combo terminal

Impedance 1/4 inch phone/2.2 MΩ, XLR (balanced)/1.2 kΩ, XLR (unbalanced)/2.7 kΩ

Input sensitivity 1/4 inch phone/27 mV (-31 dBV), XLR/3.3 mV (-50 dBV)

Equivalent noise level 1/4 inch phone/27 mV (-31 dBV), XLR/3.3 mV (-50 dBV)

- Phantom power 48 V, max. 10 mA

- Aux input: 3.5 mm stereo connector / impedance: 22 kΩ

- Headphones OUT: Output connector 1/4 stereo phone connector (mute function) / Maximum output 2 x 50 mW / 2000 ohm / impedance 1000Ω

- Tuner OUT: Output connector 1/4 inch phone connector / Output voltage 100 mV (-20 dBV)

- Line OUT output connector 1/4 inch phone connector (post output) / Output voltage 700 mV (-3 dBV)

- DI OUT

Terminal XLR connector / 1 = ground 2 = positive (＋) 3 = negative (-)

Output voltage 41 mV (-28 dBV)

・SEND OUT

Terminal 1/4 inch phone jack (pre-master output) (parallel output)

Output voltage 300 mV (-10 dBV)

・Footswitch terminal 1/4 stereo phone jack/Tip = internal effect on/off Ring = external effect on/off Sleeve = common (ground)

・F characteristic 60Hz-18kHz

・Power consumption 120W (100V 50/60Hz)

・Cabinet Birch Plywood (12mm) Stand screw size: 3/8 inch

■Size: H260xW325xD235mm
■Weight: 7kg
■Accessories: Carrying bag