CLASSIC PRO / UXD-100+UT-61+LAV6

CWS800 series, single channel receiver, belt pack transmitter and lavalier microphone set. Equipped with auto scan mode to automatically search for channels without interference, and SYNC function to send receiver settings to transmitter. Select any one of the 30 channels in the B band. Up to 6 sets can be used in the same area.

・Select one channel to use from 30 B-band channels. Up to 6 sets can be used in the same area.

・Maximum reach: Approximately 90m (Note: The reach of the radio wave varies depending on the radio wave conditions, the presence or absence of reflection or interference, and the transmission output)

・Easy muting with the switch on the hand.

・The LCD screen of the receiver now displays characters more clearly and is easier to read. (VA LCD installed)

◆Receiver CW801R x 1
Reception frequency: UHF806.125-809.750MHz
Number of systems usable in the same area: Up to 6 systems
Case: 19-inch EIA standard rack mount compatible (metal case)
Transmission method: PLL synthesizer method
S/N ratio: >100dB
Spurious response: 70dB (minimum value)
Reception sensitivity: 52dB
AF response: 80Hz-18kHz
T.H.D: <1% (at 1kHz)
Dynamic range: >100dB
Tone signal: 32.768kHz
Audio output: Balanced XLR, unbalanced phone
Power supply: DC12V
Current consumption: 260±10mA
Dimensions: 200 x 42 x 183mm
Weight: 930g
Operating temperature: 5℃ to 45℃
Accessories: 2 antennas, power adapter, bracket for connecting 2 receivers, 1 rack ear, 1 cable (XLR female-phone)

◆Beltpack transmitter (CW800T)
Channel setting: SYNC
Display: LCD display shows channel and battery level
RF output: 10mW (max)
Frequency stability: ±0.005%
Spurious radiation: >60dB
Gain: 0dB, -10dB, -20dB
Battery: DC3V (2 x 1.5V AA batteries)
Current consumption: 120±10mA
Dimensions: 65x97x25mm
Weight: 86g

◆Lavalier microphone (CW4L)
Type: Unidirectional condenser microphone
Sensitivity: -47 ± 4dB
Frequency response: 100 - 20,000Hz
Signal to noise ratio: 60dB
Connector: 3 pin Mini XLR TA3F female connector
Dimensions: 13φx37mm
Accessories: Windscreen, tie pin clip

*If mounting one unit in 1U, please purchase CWR800PLUSRKPAIR.