YAMAHA / HS8I

Variations

The HS8I is a 2-way bass-reflex studio monitor. It uses an 8-inch woofer for LF and a 1-inch dome tweeter for HF. It is bi-amped with 75W LF and 45W HF. It is equipped with a high-quality power amplifier with a total output of 120W. M8x8 (2x4 sided) speakers are provided on the top, bottom, and both sides. Optional speaker brackets allow for wall, ceiling, or overhead mounting. It is available in black.

■Studio Monitor
■Powered
■2-Way
■8""
■10.7kg
■1 Unit
■Black

■Frequency Range: (-10dB) 38Hz - 30kHz, (-3dB) 47Hz - 24kHz
■Components: LF 8"" Cone, HF 1"" Dome
■Amplifier Output: Total 120W, LF: 75W (4Ω), HF: 45W (8Ω)
■Input Connectors: 1 x XLR3-31 type (balanced), 1 x Phone (balanced)
■Input Sensitivity: Maximum Level -10dBu, Center Level +4dBu
■Controls
LEVEL Control
EQ: HIGH TRIM Switch (+/- 2dB at HF)
ROOM CONTROL Switch (0/-2/-4 dB under 500Hz)
■Power Consumption: 60W
■Dimensions Dimensions: 250W x 390H x 334D mm
■Weight: 10.7kg
■Accessories: Instruction manual, power cord, bracket mounting screws (2)

This 8-inch model boasts ample low-frequency reproduction and packs all the performance required for professional studio monitors. It is equipped with rigging points for overhead installation.

- 2-way bass reflex design with an 8-inch woofer for LF and a 1-inch dome tweeter for HF
- Frequency response: 38Hz - 30kHz (-10dB) / 47Hz - 24kHz (-3dB) and covers a wide frequency range.
- LF75W + HF45W bi-amp specification. Equipped with a high-quality power amplifier with a total output of 120W.
- Equipped with M8x8 (2x4) speakers on the top, bottom, and both sides. Can be mounted on a wall, ceiling, or ceiling using separately sold speaker brackets.

■ Newly developed speaker unit and carefully selected acoustic components
The newly developed high-performance 1-inch dome tweeter, dedicated woofer, and reselected and optimized acoustic components combine to create a Dramatically improved playback capabilities achieved through this combination.
■High-Performance Dedicated Power Amplifier
The bi-amp system uses dedicated power amplifiers to amplify both the high and low frequencies. This delivers consistently high-quality, consistent sound with minimal tonal shifts.
■Resonance-Reducing Enclosure Design
Unwanted resonances are thoroughly eliminated, maximizing sound precision. The thick MDF, with its high rigidity and consistent acoustic properties, is joined using a three-sided fastening, a highly durable technique long used in wooden construction.
■Noise Reduction with Latest Fluid Sound Control Technology
The new HS Series' new ports minimize air vortices, reducing audible noise by up to 6dB SPL, meeting the demands of music production environments.
■Controls and Extensive Terminals Allow for Precise Setup to Suit Your Environment
ROOM CONTROL compensates for the low frequencies that tend to be emphasized when speakers are placed close to a wall, enabling accurate monitoring. HIGH TRIM (+2dB, 0, -2dB) allows for precise balancing to suit your room and application. You can set it up to your needs. The input terminals are equipped with both XLR and TRS phone jacks, allowing for flexible use in a variety of applications, such as output from mixers, keyboards, and audio interfaces.
■ Rigging points for hanging installation
The HS5I and HS5IW are equipped with M5x8 (2x4 sides) rigging points, while the HS7I, HS7IW, HS8I, and HS8IW are equipped with M8x8 (2x4 sides) rigging points (screw holes) on the top, bottom, and both sides. Wall or ceiling mounting is also possible using the separately sold speaker bracket.