TC HELICON / VoiceTone E1

TC HELICON's vocal echo effect pedal. Features 13 delay styles, including classic slap echo. Equipped with a low-noise, high-quality microphone preamp.

The VoiceTone E1 adds depth to live vocals with its versatile echo effects.

Vocal echo and slapback are classic effects for vocals in recording and live performances, adding space to the sound. The VoiceTone E1 brings these effects to life in an affordable, easy-to-use effects pedal.

VoiceTone E1 - Key Features

■ Features 13 types of echo, including ""Slap,"" ""Tap,"" and ""FX.""

■ Tap the footswitch in time with the rhythm to synchronize the echo to the song's tempo.

■ Analog button: Provides a soft echo reminiscent of the tape era.

■ Easy connection to standard microphones and mixers.

■ Equipped with a USB port for computer connection. Firmware updates and product information can be obtained or viewed via the VoiceSupport application.

■ Mic Control function included. By connecting the optional TC-Helicon MP-75 microphone (sold separately), you can switch the effect on/off directly from the microphone.

■ Phantom power compatible (always on, measured value: approx. 21V)

■ Input: XLR

Microphone input impedance: Balanced: 2.68 kOhms

Microphone input level @ 0dBFS: -42 dBu to +1 dBu

EIN @ Maximum microphone gain Rg=150 Ohms: -126 dBu

Microphone input S/N ratio: >104 dB

■ Output: XLR

Output impedance, balanced/unbalanced: 200 Ohms/100 Ohms

Full-scale output: +1 dBu

Dynamic range: >104 dB, 20 Hz?20 kHz

■ Frequency response: +0/-0.3 dB, 20 Hz?20 kHz

■ Power supply: Power supply (included) 12V, 0.4A

■ Power consumption 5.6W

■Dimensions: 140 x 90 x 60 mm

■Weight: 420 g

*The output must be connected to the XLR microphone input terminal using an XLR female-to-XLR male microphone cable. Connecting to a TS/TRS phone line input terminal may result in noise, insufficient volume, or noticeable noise when increasing the gain, preventing normal use.

*When connecting to an XLR input terminal of a mixer, etc., please ensure the phantom power from the mixer is OFF to avoid potential malfunction.

*The phantom power supplied by the effector is approximately +21V (measured value), therefore condenser microphones requiring +48V cannot be used.

※【Notice Regarding TC HELICON Product Software ""VoiceSupport 2""】

Currently, ""VoiceSupport 2"" can be downloaded from the manufacturer's website, but there have been reports of a bug where the device is not properly recognized (e.g., ""Device in use"" is displayed) in the latest environments such as Windows 11 from 2025 onwards.

We apologize, but at this time, you will have to wait for the manufacturer to release an improved version. We will promptly announce the release of the latest version through news and other channels.