TC HELICON / VoiceTone T1

This tone and dynamics processor makes it easy to refine the sound quality of live vocals. Adaptive Tone automatically adjusts the EQ, compressor, de-esser, and noise gate to match the input audio, resulting in a clear and easy-to-listen vocal sound. Recommended for those who want to create a stable vocal sound in live performances.

■Compact Vocal Effects Processor, Tone Correction/Dynamics

The VoiceTone T1 is a powerful ally, like having a dedicated sound engineer on every stage. It automatically tracks your voice, applying studio-quality dynamics and EQ to bring out the best parts of your vocal tone. The VoiceTone T1 gives your vocals a recording-like richness even during live performances, without wasting time adjusting complex equipment.

■Key Features

・Achieve great vocal sound instantly with ultra-simple operation.

・Shape and compressor/de-esser knobs with center notches; simply set them to the center for standard settings.

・Warmth button adds just the right amount of low frequency when needed.

・Equipped with a USB port for computer connection. You can obtain or view firmware updates, news, and usage tips from the VoiceSupport application.

* Phantom power support (always on, measured value: approx. 21V)

Input

■ Microphone input impedance: Balanced: 2.68 kOhms

■ Microphone input level @ 0dBFS: -42 dBu to +1 dBu

■ EIN @ Maximum microphone gain Rg=150 Ohms: -126 dBu

■ Microphone input S/N ratio: >104 dB

Output

■ Output impedance, balanced/unbalanced: 200 Ohms/100 Ohms

■ Full-scale output: +1 dBu

■ Dynamic range: >104 dB, 20 Hz to 20 kHz

■ Frequency response +0/-0.3 dB: 20 ??Hz to 20 kHz

Power supply

■ Power supply (included) 12V, 0.4A

■ Power consumption 5.6W

Other

■ Dimensions 140 x 90 x 60 mm

■Weight: 420 g

*Please connect the output to the XLR microphone input terminal using an XLR female-to-XLR male microphone cable. Connecting to a TS/TRS phone line input terminal may result in noise, insufficient volume, or noticeable noise when increasing the gain, making normal use impossible.

*When connecting to an XLR input terminal of a mixer, etc., please use with the phantom power from the mixer turned OFF, as this may cause malfunction.

*The phantom power supplied by the effects unit is approximately +21V (measured value), so condenser microphones requiring +48V cannot be used.

*[Notice regarding TC HELICON product software ""VoiceSupport 2""]

Currently, ""VoiceSupport 2"" can be downloaded from the manufacturer's website, but there have been reports of issues where the device is not properly recognized (e.g., ""Device in use"" is displayed) in the latest environments such as Windows 11 after 2025.


We apologize, but at this time, you will have to wait for the manufacturer to release an improved version. We will promptly inform you through news and other channels once the latest version is released.