CLASSIC PRO / CN360

This is the top-of-the-line CLASSIC PRO equalizer that uses variable Q characteristics to enable intuitive equalization. It is equipped with a 30Hz low-cut filter and a 20kHz high-cut filter, allowing you to create the best sound in any situation.

■Variable Q Graphic Equalizer
The CN360 is a variable Q design that not only changes the Q value of the corresponding frequency depending on the amount of boost/cut, but also changes the Q value of the frequency adjacent to that fader at the same time. When the amount of boost/cut is small, a gentle curve is drawn that affects a wide frequency range, and as the amount of boost/cut increases, the frequency range to be corrected becomes narrower. Unlike constant Q, which performs EQ correction according to appearance, this design places more emphasis on sound creation based on the auditory sense.

■Specifications
[Input]
Type: Transformerless balanced

[Impedance]
Balanced 20kΩ
Unbalanced 10kΩ

[Output]
Type: Transformer balanced
Minimum load impedance 600Ω
Maximum level +22dBu

[Acoustic characteristics]
Frequency response: ±0.5dB (20Hz-20kHz)
Distortion (@ +4dBm) <0.01% @ 1kHz Distortion (@ +4dBm): <0.01% @ 1kHz
Equivalent input noise <-90dBu (20Hz-20kHz unweighted)
S/N ratio: >100dB
Dynamic range: 112dB
Inter-channel crosstalk: >75dB @ 1kHz
Overload indicator: +19dBm
Level control: +6dB to ∞

[Filter]
Center frequency: 2 x 30 bands
Frequency range: 25Hz-20kHz 1/3 octave
Tolerance: ±5%
Maximum boost/cut: ±6/12dB
High-pass filter: 18dB/octave -3dB @ 30Hz
Low-pass filter: 18dB/octave -3dB @ 20kHz

[Power supply]
Rated voltage: 100V 50/60Hz
Power consumption: Less than 15VA

[Weight]
Main unit: 5Kg

[Dimensions]
W48.2 x H13.3 x D20.5cm