Introducing a good old vintage style model that retains the functionality of the Prophet'08!
■Analog Synthesizer
- In the Prophet'08, all 52 knobs were rotary encoders, whereas in the Prophet'08 PE, 38 of the 52 knobs are potentiometers (volume). Lines are drawn on the top of these knobs, allowing you to see their current position (angle) at a glance.
- Encoders without lines are fine when recalling patches stored in memory, but with pots, there is a discrepancy between the knob position at the time the patch was created and the current knob position. To correct this discrepancy, the Prophet'08 PE offers the following three modes.
- In addition, the [PARAM 1] and [PARAM 2] knobs have been changed to encoders with clicks, allowing for more accurate program selection. *PE stands for Potentiometer Edition.
1: Relative: In this mode, the current knob position is assigned the position (value) at the time of saving.
2: Passthru: In this mode, the actual LCD value changes as soon as the knob is turned and the current knob position matches the saved knob position.
3: Jump: In this mode, turning a knob changes the LCD value relative to the current knob position.
■Specifications
8-voice analog synthesizer
61 keys (semi-weighted, velocity- and aftertouch-sensitive, splittable into two zones in split mode)
Fully programmable: 128 programs x 2 banks for a total of 256 programs (MIDI dumpable)
Each program has two layers and can be played stacked (2 layers = 4 voices) or split (2 layers = 4 voices each)
16-step x 4-track analog-style gate sequencer (MIDI syncable)
Various modulation routines with 20 sources for modulating 42 parameters
Expandable to 16 voices by connecting two PROPHET'08 units via polychain
Arpe Generator (MIDI sync possible)
Fully MIDI compatible. Per voice:
2 analog oscillators (digitally controlled)
Waveforms: Sawtooth/Triangle/Sawtooth + Triangle/Pulse (pulse width modulatable)
Hard sync
2 independent glide (portamento) modes for each oscillator
5 unison modes available
1 white noise generator
1 analog low-pass filter (equipped with a chip equivalent to a Curtis CEM)
Low-pass filter is 4/2-pole switchable, self-oscillation possible (4-pole)
1 analog VCA
3 envelopes (ADSR + Delay)
Envelope 3 can be looped
4 LFOs (MIDI/sequencer sync possible) Inputs/Outputs: Audio Output: Main Out Stereo L/R, Output B (Dedicated Output Terminal for Layer B), Stereo L/R (1/4-inch Phone Unbalanced), Headphones, Pedal (TSR Type or Control Voltage DC 0-5V), Sustain (Momentary Type, Polarity Reversible)
MIDI: IN/OUT/THRU/POLY CHAIN
Power Supply: 100V AC 50/60Hz (Dedicated AC Adapter Included)
Dimensions: 888(W) x 308(D) x 98(H)mm
Weight: Approx. 8.5kg
関連商品
商品レビューProduct Review
すべてのレビューを見る