ART / ARTS8

This 1U-sized splitter features eight channels, each capable of splitting a single input into two outputs: a direct output and an output isolated by a transformer. It's an 8-channel IN/16-out splitter.

■ Microphone Splitter

■ 8 channels

■ Direct output has phantom power, allowing the use of condenser microphones.

■ PAD switch on each channel: Compatible not only with microphones, but also with mixers, keyboards, etc.

■Each channel features a ground lift switch.

■Frequency Response: 20 Hz to 20K Hz, ±0.25 dB @ -15 dBu, -3 dB at approximately 165K Hz

■THD:

Less than 0.26% from 20 Hz to 20K Hz at -15 dBu input

Less than 0.1% from 45 Hz to 20K Hz at -15 dBu input

0.002% Typical at 1K Hz, -15 dBu input

■PHASE RESPONSE: Less than 10 degrees at 20K Hz (ref. 1K Hz)

■Input Impedance: Greater than 1.1K Ohms at 1K Hz (Typical driving source impedance is 150 Ohms)

■Output Impedance: Less than 255 Ohms at 1K Hz (Typical output load impedance is 1K (Ohms)

■COMMON MODE REJECTION RATIO: Greater than 105 dB @ 60 Hz, Greater than 80 dB @ 3K Hz

■VOLTAGE INSERTION LOSS: Approximately 2 dB at 1K Hz

■Maximum Input Level (1% THD): -1.4 dBu at 20 Hz, +3.5 dBu at 30 Hz, +9.4 dBu at 50 Hz

■Dimensions: 1.75""H x 19""W x 3.75""D (44.5mm x 482.6mm x 95mm)

■Weight: 3.75 lbs. (1.7 kg)