This 15W amplifier can be installed on a table or wall. It has a built-in telephone paging function and can be powered remotely from the paging microphone with a remote switch.
■ Power Amplifier
■ High Impedance 670Ω
■ 15W
■ Built-in Telephone Paging Function
Power Supply
AC 100V 50/60 Hz
Power Consumption
32W (rated output), 15W (according to the Electrical Appliance and Material Safety Act)
Rated Output
15W
Distortion
1% or less
Frequency Response
100Hz to 10kHz ±3dB
Input
Paging Microphone with Remote Switch: -62dB*, 600Ω, unbalanced, DIN jack
Microphone: -62dB*, 600Ω, unbalanced, phone jack
Auxiliary: -12dB*, 5kΩ, unbalanced, RCA pin jack
Paging: -12dB*, 5kΩ kΩ unbalanced push terminal
* Paging microphone with microphone/remote switch is jack-switchable (microphone input takes priority)
Output
High impedance 100V: 670 Ω
Low impedance: 4 Ω (4-16 Ω speakers can be used)
Plug-in terminal block (inside bottom cover)
Compatible wires (Solid wire: φ0.4-φ1.6 mm (AWG 26-14), Stranded wire: 0.3-1.25 mm (AWG 22-16))
(Plain wire φ0.18 mm or larger)
Signal-to-Noise Ratio
60 dB or larger
Mute Circuit
Attenuates the auxiliary input signal during microphone and paging broadcasts (adjustable mute amount)
Functions
Phase paging function, remote power function
Operating temperature range
0 ℃ to +40℃
Finish: ABS resin, gray (approximate Munsell N8.0 color)
Dimensions: 300 (W) x 83 (H) x 200 (D) mm
Weight: 1.9 kg
関連商品
商品レビューProduct Review
すべてのレビューを見る