TOA / P-240DH

The TOA P-240DH is a high-impedance 100V series dedicated dual power amplifier with a rated output of 240 W + 240 W (42 Ω load).

■High-Impedance Power Amplifier
■240W + 240W (42Ω)
■17kg
■2U

■Power Supply
AC 100V 50/60 Hz
■Power Consumption
870 W (rated output, 42Ω + 42Ω), 340 W (according to the Electrical Appliance and Material Safety Act)
■Input Sensitivity
+4 dB* (1.23 V) ±0.5 dB (input level control knob at maximum)
■Input Impedance
10 kΩ, electronically balanced, M3 screw terminals, 6.4 mm barrier spacing, balanced phone jack
■Rated Output
2 channels: 240 W + 240 W (42Ω: high impedance, 100 V)
M4 screw terminals (5.5-4 or 5.5-5 crimp terminals can be used), 10 mm barrier spacing
■Frequency Response
70 Hz - 20 kHz (+0 dB, -3 dB)
■Total Harmonic Distortion
0.05% (42 Ω, 1 kHz)
0.15% (42 Ω, 70 Hz to 16 kHz)
■Protection Circuits
Overcurrent due to overload, short circuit, abnormal DC voltage output, heat sink temperature rise (above 110°C)
■Signal-to-Noise Ratio
115 dB (20 Hz to 20 kHz), 120 dB (JIS-A)
■Cooling Method
Natural air cooling
■Finish
Panel: Aluminum, black (approximate Munsell N1.0 color), anodized
Case: Pre-coated steel, black (approximate Munsell N1.0 color)
■Dimensions
482 (W) x 102.4 (H) x 456 (D) mm
■Weight
17 kg
■Accessories
Power cord (2.5 m)...1, Rack mounting washers...4, Rack mounting screws...4, Decorative screws...4, Power cord locking bracket...1
*If storing in a cabinet rack, remove the back panel of the rack for cooling purposes.

Product & Service Information