PANASONIC(RAMSA) / WA-260

These are two types of RAMSA call amplifiers that offer high sound quality and a compact design.

Two types of high-quality, compact call amplifiers.

● Space-saving A4 size. Wall mounting is also possible.

● Features screwless terminal blocks for easy speaker line connection. (Off setting at factory)

● Mutes line volume when calling via microphone or paging.

● Switchable between two output systems: SP1 and SP2.

● Built-in emergency shutoff circuit.

● Supports telephone paging control. (Input only. Power control not available.)

Product Specifications

●Power Supply: AC100 V 50/60 Hz

●Power Consumption (Note): 26 W

●Rated Power Consumption: 64 W (at 30 W rated output)

●Input Circuits:

Microphone: -63 dBs / 3 kΩ unbalanced (1 large single jack circuit)

Line: 10 dBs 10 kΩ unbalanced (1 mono circuit) (Pin jack x 2: RL is mixed internally)

Telephone Paging:

10 dBs 10 kΩ unbalanced (1 2-wire terminal block circuit)

●Load Impedance:

High Impedance (100 series) Balanced 330 Ω

Low Impedance 4 Ω 16 Ω

●Rated Output: 30 W

●Control Circuit: Emergency break (DC24 V break)

Paging (voltage-free make-contact control)

● Frequency Response: 100 Hz - 10 kHz +1.5 dB, 4.5 dB (line)

● Distortion: 1.0% or less

● Residual Noise Ratio: 80 dB or higher (JIS A)

● Output Switching: 2 circuits

● Dimensions: 300 (W) x 83 (H) x 213 (D) (Height includes 4 rubber feet)

● Weight: Approx. 2.1 kg

● Finish: AV Ivory (Munsell 7.9Y6.8/0.8 approximate color)