JBL / Control 24CT Micro Plus

The Control 24CT Micro Plus is a 2-way full-range speaker for in-ceiling installation from JBL. It features a 25W transformer tap for high output. An improved crossover network provides consistent sound throughout the entire listening area. Its wide frequency response and low distortion ensure clear announcements and background music. Its slim design allows it to be installed in narrow ceiling spaces.

■Frequency Range (-10dB): 80Hz to 25kHz
■Coverage Angle (500Hz to 10kHz average): 150°
■Sensitivity (1W, 1m): 85dB SPL
■Transformer Tap: 100V: 25W, 12W / 70V: 25W, 12W, 6W
■Driver Configuration: LF: 115mm x 1 / HF: 12mm x 1
■Finish: White
■Dimensions (Diameter x Height): 200mm x 115mm
■Aperture: 168mm
■Applicable Panel Thickness: 10-30mm
■Weight: 2.5kg
■Accessories: C-shaped support bracket, support rail, paint shield, template
■Pair

・This is a high-output version of the Control 24CT Micro, featuring a 25W transformer tap.
・An improved crossover network provides more uniform sound throughout the entire listening area.

Achieving a 150° coverage angle, it covers a wide area with fewer speakers.

Wide frequency response and low distortion produce clear announcements and background music.

Slim design allows installation even in narrow ceilings.

These in-ceiling speakers enhance commercial spaces with their transparent highs and deep bass.

Richly expanding, elegant, and deep sound quality creates a comfortable, luxurious atmosphere.


■Emotionally rich background music and clear announcements enhance the ambiance of the space. Pairing them with a subwoofer of the same design enables powerful, rich bass reproduction.

■Butyl rubber edges are used on the low-frequency drivers, providing high durability even in humid environments.

■ Low-impedance and high-impedance models for constant-voltage transmission systems are available. The high-impedance Control 24CT/26CT/19CST models allow transformer tap switching from the front of the speaker.

■ The surround and grille can be painted to match the design of the installation location. A shield is included to protect the speaker during painting.

■ The input connectors on the Control 24C/CT, Control 26C/CT, and Control 19CS/CST use detachable Euroblock connectors, allowing wiring to be done before installing the speaker. Terminals for loop-through connections are also provided.

■ C-shaped support brackets and support rails are included to reinforce the ceiling where the speaker will be installed.

■The enclosure complies with the IP-34 protection rating (IEC 60529) for dustproof and waterproof protection, preventing wires and solid objects with a diameter of 2.5 mm or more from entering the enclosure and protecting it from harmful effects from water splashes from any direction (except the Control 26-DT).

* Compliance with the protection rating does not guarantee freedom from deterioration over time such as rust or malfunction. Metal parts such as the grille may rust in wet or humid environments.