Headphones / Earphones
Wireless BLUETOOTH
Wireless headphones
audio technica/ATH-M50xBT2 + AT-HC3C/1.2 USB Type-C cable set

audio technica / ATH-M50xBT2 + AT-HC3C/1.2 USB Type-C cable set

Variations

audio technicaワイヤレスモニターヘッドホン「ATH-M50xBT2」と、3.5mm-USB Type-Cケーブルの「AT-HC3C/1.2」をバンドルしたお得なセット！

・A new version of audio technica's world-recognized closed-back monitor headphones ATH-M50x wireless model. Adopts AKM Hi-Fi DAC & headphone amplifier AK4331 and supports 96kHz/24bit. The sound source transmitted using LDAC's high quality codec is output with high resolution sound quality.

■Sound quality inherited from M50x dedicated driver
・Using a uniquely developed large-diameter 45mm driver and dedicated amplifier, it achieves outstanding transparency in a wide frequency range and reproduces deep and accurate bass.

■DAC & headphone amplifier that leads to sound faithful to the original sound
・Uses AKM Hi-Fi DAC & headphone amplifier (AK4331). It supports 96kHz/24bit and plays high resolution sound sources transmitted with LDAC's high quality codec.

■PML-CAP capacitor made by Rubicon that achieves low noise and low distortion
-A chip-type thin-film polymer multilayer capacitor, which is an ultra-miniature version of the audio-grade capacitors used in high-end amplifiers, is used in the power supply circuit of the DAC and headphone amplifier (AK4331). By stabilizing the current, noise and sound distortion are suppressed, and highly pure sound is reproduced.

■Compatible with LDAC codec that allows you to listen to high-quality sound equivalent to high resolution
- Supports up to 96kHz/24bit and reproduces near-lossless sound quality with wideband and high dynamic range. It also supports AAC/SBC codecs.

■Low Latency Mode to reduce the lag between sound and video*
-Enjoy playback with minimal sound delay when watching videos or playing games on your smartphone or tablet. Switching between low-latency modes is done in the app.
(*) Bluetooth communication may be interrupted easily due to obstacles or radio wave conditions.

■Beamforming technology for clear calls
・Small, high-performance MEMS (Micro Electro Mechanical Systems) microphones are laid out in two locations on the headphone housing. Beamforming technology (*) using these two microphones allows you to clearly hear your voice even in environments with a lot of surrounding noise.
(*) The accuracy of call quality is improved by providing directivity toward the speaker's mouth and accurately picking up the voice.

■Sidetone function that supports natural calls
- When making a call, you can hear your own voice and surrounding sounds through the microphone, reducing the degree of sealing even when you are wearing headphones. Your voice is louder than necessary
(*) You can turn the sidetone function ON/OFF at any time using the dedicated app "Connect."

■Mic mute function that prevents unnecessary sounds from being picked up during calls

■Supports multi-point connection to two Bluetooth devices at the same time

■Compatible with Amazon Alexa (*) to make your everyday life more convenient and enjoyable
(*) Amazon Alexa can be used after changing the key operations using the dedicated app "Connect". Please refer to Amazon's homepage for other features.

■Easy to understand button operations
- You can play/pause music, forward/backward music, adjust volume, and answer/end calls with the touch of a button. You can also activate your smartphone's voice assistant functions, such as Siri and Google Assistant, with a single button (*).
(*) It may not be compatible depending on the smartphone specifications or app version. Cannot be started if Amazon Alexa is enabled.

■Fast Pair compatible for convenient connection with Android devices
(*) Only one Android device can be Fast Paired.

■Supports wired connection
- Comes with a 1.2m cord, so you can use it with a wired connection even if the battery runs out.

■Auto power off function
- The power will automatically turn off after 5 minutes when it is not connected to a device.

■Up to approximately 50 hours (*) playback
(*) Varies depending on usage conditions.

■Supports quick charging
- Approximately 180 minutes (*) of continuous playback is possible with approximately 10 minutes of charging. If you forget to charge your headphones, they'll be ready while you run other errands.
(*) Varies depending on usage conditions.

■Compatible with the dedicated app “Connect”
- Two equalizers are available that can be enjoyed like a mixer. Customize the sound quality, volume level, sound balance, etc. to your liking.

■Specifications
・Communication method: Compliant with Bluetooth standard Ver.5.0
・Supported codecs: LDAC, AAC, SBC
・Model: Sealed dynamic type ・Driver: φ45mm
- Usable time (*): Continuous communication (when playing music) up to approximately 50 hours (*) Varies depending on usage conditions.
・Accessories: USB charging cable (30cm, USB Type-A / USB Type-C), cord (1.2m/φ3.5mm gold-plated stereo mini plug/L type), pouch

audio-technica / AT-HC2C/1.2 M series and R series headphones are now Type-C. A headphone cable with a USB Type-C connection that allows you to easily enjoy high quality sound just by connecting it to a digital device.

■Cable design that prioritizes sound quality, luxuriously using only high-purity 6NOCC:
This cable uses only high-purity 6N OCC (single crystal oxygen-free copper)* with sound quality as our top priority. A conductor with few crystal boundaries suppresses loss and turbidity of minute signals, delivering the nuances of the sound source as is to the headphones. Ideal for listening environments where you want to bring out delicate expressive power.
*6N?OCC (Single Crystal Oxygen-Free Copper): High purity copper with a purity of 99.9999% refers to a wire rod that has been converted to 6N in the process of forming into a single crystal using the OCC method (Ohno continuous casting method). Since the OCC method allows copper to be formed into almost one large crystal, there are extremely few crystal boundaries, which greatly reduces loss and distortion during signal transmission.
■Spiral shield that shuts out external noise: The spiral shield structure surrounding the conductor blocks external noise. Accurately reproduces the transparency of the sound field and the expression of details.
■Metal plug that combines luxury and noise resistance
■Uses a cloth-wrapped sheath that feels good to the touch and doesn't get tangled.