PLAYTECH / Lyra Acoustic Preamp アダプターセット

This great value set includes an adapter. PLAYTECH presents this acoustic guitar preamp! It features a 2-band EQ, reverb, and chorus effects, allowing for a wide range of sound creation. In addition to a DI output, it also features tuner output, phone output, and line input jacks. This professional-grade unit caters to a wide range of needs, from beginners to advanced players.

[Lyra Acoustic Preamp]
■Features
- 2-channel tone control (with mid-frequency curve switching function)
- Reverb and chorus effects
- Headphone output
- Line input
- Tuner output
- Powered by a 9V battery or 9V power adapter (sold separately)

■Controls
- VOLUME knob: Adjusts the volume of all outputs (excluding TUNER)
- BASS knob: Controls low frequencies
- TREBLE knob: Controls high frequencies
- GAIN knob: Adjusts the input signal.

・CHORUS: Turns the chorus effect ON/OFF
-SPEED: Adjusts the effect speed
-DEPTH: Adjusts the effect depth

・REVERB: Turns the reverb effect ON/OFF
-DWELL: Adjusts the decay time of the reverb effect
-REVERB: Adjusts the amount of reverb by mixing it with the dry signal

・SHAPE switch: Cuts mid-range frequencies and boosts high and low frequencies
-PHASE switch: Inverts the phase to suppress feedback
-D.I switch: Switches between ground and lift for the XLR DI output.

・CLIP lamp: Lights red if the input signal is excessive; otherwise, lights green.

■Input
・INPUT: Input terminal. Connect to an instrument or other effects.
・LINE IN: Connect to an external audio source such as a smartphone.
*VOLUME and GAIN affect the output level (excluding THRU) even when the effects unit is OFF.
*The signal input to LINE IN cannot be adjusted on the effects unit itself. Adjust it on the sound output device.

■Output
・OUTPUT: Output terminal. Connect to an amplifier or subsequent effects unit.
・TUNER: Outputs the input signal as is.
・DI OUT: XLR output. Use when connecting directly to a mixer.
・PHONES: Can be connected to headphones or earphones.
*The signal input to LINE IN is also played back in mono. (The same sound is played on L/R.)

■SPECS
Input Impedance: 1MΩ
Current Consumption: 110 mA
Power Supply: External power adapter (100-240 V, 50/60 Hz) or 9V battery
Operating Voltage: DC 9V / 1A, center negative
Dimensions: 128 mm x 93 mm x 58 mm (W x H x D)

[Power Adapter]
■INPUT: 100-240V 50/60Hz
■OUTPUT: DC9V
■1A
■Inner Diameter: 2.1mm
■Center Negative
■Switching
■Cable Length: Approx. 1.4m
■Dimensions: W43 x H76 x D32 mm (excluding plug)
■Weight: 85g