PMC / PMC6

＜＜Sep 2025 New Product！＞＞ The PMC/PMC 6 is ideal for professional environments requiring a compact and reliable reference monitor.

The PMC 6 is packed with innovative PMC technology, delivering the same sonic character as our renowned large-format monitors. Ideal for use in small control rooms and large-scale immersive systems, its incredible resolution helps you craft the perfect mix.

The custom-built 6-inch bass driver with 20mm of excursion is designed to integrate with the latest ATL® bass loading and Laminair® airflow technology.

This combination surpasses many 8-inch monitors, delivering enhanced bass extension, headroom, dynamics, and low distortion at any volume.

High frequencies are delivered by a precision-engineered 1-inch fabric soft-dome tweeter, which, combined with a shallow waveguide, disperses a uniform sound image over a wide area.

Both the bass and treble drivers are each driven by a 200W Class-D amplifier with ultra-low distortion and a high damping factor.

A sophisticated DSP engine automatically adjusts the crossovers in either vertical or horizontal orientation, providing optimal tone, phase, and imaging in any setting.

Calibration
The PMC 6 can be calibrated using the controls on the rear panel or via the SoundAlign™ software, accessible via a browser.

Upgrade to an XBD System for Extended Low End
Upgrade to a full-range, standalone PMC 6 XBD system by adding a PMC 8 SUB. Enabling ""XBD"" DSP mode allows the two units to work together perfectly, delivering clean low frequencies down to 25 Hz.

Product Features
- Active 2-way nearfield reference monitor with ATL? bass loading
- State-of-the-art Class-D amplifiers: HF 200W, LF 200W
- Analog/AES3 digital input (16/24-bit, 18-192kHz sample rate)
- Digital ""Through"" output (AES3 24-bit 96kHz)
- SoundAlign? network control interface for setting and EQ control (single and group)
- Sophisticated DSP for crossover, driver protection, EQ, delay/phase settings
- DSP-driven automatic vertical/horizontal orientation
- Expandable to ""PMC 6 XBD"" with PMC 6 + PMC 8 SUB combination for low frequencies down to 25Hz
- Optional mounting brackets allow for hanging installation in multi-channel and immersive systems

Product Specifications
Type: Active 2-way nearfield reference monitor with ATL? bass loading

Drive Unit Complement:
LF PMC 150mm (6”) studio 6 driver
　HF PMC 27mm (1”) soft dome tweeter

Effective ATL? Length: 1.8m (5.9ft)

Frequency Response: 39Hz - 25kHz (- 3dB) (@1m full space, on-axis)

Sensitivity: +4dBu input signal = 98dB SPL @ 1m

Max continuous SPL: 106dB @1m
(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Max Peak SPL: 118dB @1m
(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Directivity:
　H +/-60 degrees
　V +50/-40 degrees (-6dB off axis @10kHz)


Input: XLR switchable between analogue & digital AES3

Analogue input
- +20/+24dBu max. input level (selectable)
-22K ohm input impedance

Digital input
- 16/24-bit AES3 signal, left, right or left + right
- 18 - 192kHz sample rate
-110 ohm input impedance

Expansion card slot
-For future connectivity upgrades


Output: XLR digital AES3 (fixed 24-bit @ 96kHz)

Network: RJ45 for use with PMC SoundAlign web interface

Features:
Level Trim (+/-10dB)
Orientation (portrait, landscape, auto)
High-pass filter (20 - 200Hz, 12dB/Oct)
Delay (0 - 30mS) Phase (normal or inverted)
LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
User presets (3 + factory defaults)

Latency: 2.4mS

Amplifier Power per Channel:
LF 1 x 200Wrms
　HF 1 x 200Wrms

Mains: 100-240VAC auto-switching, 50-60Hz (IEC C14)

Power consumption (idle): 35W

Power consumption (max): 400W

Dimensions:

Cabinet dimensions Portrait
　H 400mm (15.7”)
　W 215mm (8.5”)
　D 372mm (14.6”)

Cabinet dimensions Landscape
　H 215mm (8.5”)
　W 400mm (15.7”)
　D 372mm (14.6”)

Weight: 11.1kg (24.4lbs) each