PMC / PMC8-2 sub-L

＜＜Sep 2025 New Product！＞＞ The PMC8-2 sub-L is a large, full-band, high-resolution subwoofer for reference monitoring in professional environments (left).

Like the PMC 8 SUB, the PMC 8-2 SUB is a low-frequency monitor and features the same DSP engine to work seamlessly with surround/immersive systems. It offers higher performance than the PMC 8 SUB, with an output SPL down to 25 Hz. The cabinet is the same size as the PMC 8-2, allowing for seamless stacking. Two 8"" bass drivers are driven by independent 400W Class-D amplifiers. DSP functions include spatially corrective EQ, parametric EQ, time delay, phase reverse, and a unique XBD mode, controlled from the unit's rear panel or via the browser-based SoundAlign software.

The PMC 8-2 SUB can be used as a standalone subwoofer in multi-channel systems, in multi-channel immersive systems, or as an XBD cabinet (midfield monitor) in combination with the PMC 6-2 or PMC 8-2.
Left and right cabinets (PMC 8-2 SUB-L and PMC 8-2 SUB-R) are available, allowing the bass drivers to be placed outside the stereo array to match the placement of the main monitors.

Product Features
- Active subwoofer with 8"" bass driver and ATL® bass loading
- State-of-the-art Class-D amplifiers: 2 x 400W
- Analog / AES3 Digital Input (16/24-bit, 18-192kHz sample rate)
Digital ""Through"" Output (AES3 24-bit 96kHz)
SoundAlign™ Network Control Interface for setting and EQ control (single and group)
Sophisticated DSP for crossover, driver protection, EQ, delay/phase settings
XBD Gang Mode

Product Specifications
Type: Active subwoofer with twin 8-inch bass drivers and ATL™ bass loading

Driver Unit Complement:

LF PMC 200mm (8"") studio 8 driver

Effective ATL™ Length: 3m (9.8ft)

Frequency Response: 25Hz - 500Hz (-3dB) (@1m full space, on-axis)

Sensitivity: +4dBu input signal = 98dB SPL @ 1m Max continuous SPL: 115dB @1m
(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Max Peak SPL: 121dB @1m
(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Input: XLR switchable between analogue & digital AES3

Analogue input
- +20/+24dBu max. input level (selectable)
-22K ohm input impedance

Digital input
- 16/24-bit AES3 signal, left, right or left + right
- 18 - 192kHz Sample Rate - 110 ohm input impedance

Expansion card slot
-For future connectivity upgrades

Output: XLR digital AES3 (fixed 24-bit @ 96kHz)

Network : RJ45 for use with PMC SoundAlign web interface

Features: Level Trim (+/-10dB)
　High-pass/Low-pass filter (20 - 200Hz, 12dB/Oct)
　Delay (0 - 30mS) Phase (normal or inverted)
LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
　User presets (3 + factory defaults

Latency: 2.4mS

Amplifier Power per Channel:300Wrms

Mains: 100 - 240VAC auto-switching, 50-60Hz (IEC C14)

Power consumption (idle): 25W

Power consumption (max): 300W

Dimensions:
　H 534mm (21”)
　W 551mm (21.7”)
　D 440mm (17.3”)

Weight: 37.5kg (82.7lbs) each