BECOS / CompIQ TWAIN Pro MK2

The CompIQ Twain Pro MK2 is a high-precision dual-band compressor for guitar and bass. Its auto-timing function makes it easy to achieve professional-quality compression. Its variable crossover points allow you to use the two compressors independently or in tandem. Its high-quality, natural sound is a hallmark of this compressor.

■Bass Effects
■Compressor

●Controls
・DB/STK Switch: Switches between Dual Band (DB) and Stacked (STK). DB splits the bands, while STK uses series connection to achieve different tones.
・X-OVER: Adjusts the crossover frequency from 70 to 1 kHz. DB allows for compression on each band.
・TRIM: Adjusts the input level from -12 to +12 dB. Check the level with the PEAK indicator.
・RATIO: Sets the compression ratio from 1:1 to ∞:1. Limiter operation is also possible.
・THRESHOLD: Adjusts the compression onset level. Low settings increase sensitivity.
・TIMING: Switches between F (fast) and S (slow) attack and release.
・GAIN: Compensates for volume loss due to compression.
・FEED: Switches between feedforward, feedback, and both. Choose between sound quality and precision.
・SCF (LO/HI): Adjusts the sidechain bandwidth sensitivity ±. Does not affect the tone.
・KNEE: Switches between hard knee (steep) and soft knee (gentle).
・MIX: Mixes dry and effect sound. Center setting is 1:1.
・Display: 5 LEDs show RMS level.
・Footswitch: ON/OFF switch. OFF is true bypass.
・INPUT/OUTPUT: For connecting instruments and amplifiers.
・DC POWER: Connect a DC9-18V adapter.

■Specifications
・Input impedance: > 1MΩ
・Output Impedance: ~100Ω
・0dB input reference level: -20dBu (77.5mVrms)
・Output noise: -95dBV @0dBV gain
・THD VCA & DITOS: <0.12% @ 1kHz, 0dBu in/out, 600Hz crossover,600Ω load, 24KHz BW, 9-18VDC power, through 6th harmonic
・Frequency response: -1dB @ 20Hz; 0dB @ 40Hz - 25KHz
・Power Voltage: 9-18VDC(max), Center Negative Barrel
・DC Power Plug Barrel: O 5.1/2.1mm, 12mm long
・Power Consumption: < 170mAh
・Product Size: Length: 105mm, Depth: 120mm, Height: 54mm
・Product Weight: 275g