Limetone Audio / buddy

Introducing a delay with a new concept that directly conveys the dynamics and response of the input signal from Limetone Audio.

A typical digital delay internally converts the input signal to a digital signal, adds a delay sound, and finally converts it back to an analog signal and outputs it.

Limetone Audio's buddy treats the input dry sound as an analog signal, mixes the digitally generated delay sound with an internal high-quality mixer circuit, and outputs it. This makes it possible to output the original sound without changing its quality or nuance.
Even when combined with a distortion effector, the nuances produced by the distortion effecter can be conveyed as is, making it possible to create sounds with minimal changes in the sound.

The delay tone can be selected from digital or analog (tape, record).
Analog delay is an analog delay sound in which no change in the pitch of the delay sound occurs.

It is equipped with a master knob, which allows you to boost or cut the overall volume by turning it on. In situations where you want to turn on delay and booster at the same time, you can do it with just one buddy. It can also be used as a booster by setting the delay level to zero.


■Connection terminals: INPUT, OUTPUT, DC9V In
■Accessories: Instruction manual, warranty card
■External dimensions: Width (W) 65 mm, Depth (D) 110 mm, Height (H) 52 mm
■Weight: 253g
■Input impedance: 1MΩ
■Output impedance: 12.5kΩ or less
■Current consumption: 80mA