EARTHQUAKER DEVICES / Flexi Loop

EQD's flexi switch can be used as both a latching type and a momentary (unlatching type). Equipped with 2 channel loop switch. Not only can you turn on/off a group of effectors for each loop at the same time, but you don't have to worry about the clicking sound of mechanical switches. You can use the Send of one loop as a tuner out/mute, or as a switcher to send a signal to another device.

This is an electronic relay type true bypass developed by Earthquaker Devices, and Flexi-SwitchR Technology, which can be used as a regular latching switch or a momentary switch (unlatching type) depending on how you press it, has been incorporated into two effect loop pedals!

FlexiLoops is useful when instantly changing the tone created by a combination of multiple pedals, and it also helps avoid unnecessary signal routing on the pedal board, making it an ideal tool for those who have problems with vintage pedals, etc., where the original sound changes too much when turned off, making it difficult to use.

Other ways to use it include tuner out, tuner mute, and changing the signal path on the signal chain via Flexi Loops, depending on your ideas.

The signal circuit inside Flexi Loops is a completely passive circuit, but an electronic relay switch is used to turn the loop on and off, so the input signal will not be output unless power is supplied.

■SPECS
Dimensions: 121 x 64 x 57 mm
Current consumption: 25 mA
Flexi switching:
This product has Flexi-Switch functionality. It is an electronic relay type true bypass, and depending on how you press it, it can be used as a regular latching switch or a momentary switch (unlatching type).
- When using it as a latch type switch, press the switch once when you want to turn it on, like a normal effector switch, and press the switch once again when you want to turn it off.
- When used as a momentary switch, the effector will be on only while the switch is depressed, and will be off once the switch is released.

power supply:
This product can be used with a 9V AC adapter and a 2.1mm center negative adapter. We do not recommend using daisy chains or non-transformer power adapters as they may generate noise. Also, please do not use a power supply exceeding 9V as this may cause a malfunction!