DSM & Humboldt Simplifier / SIMPLIFIER X

SIMPLIFIER X has been thoroughly designed and developed to meet the needs of guitarists seeking versatility, flexibility, practicality, and of course, the ability to get the best tones ever produced with analog equipment.

SIMPLIFIER X is a fully analog, zero-watt amplifier with two independent amp blocks, each with its own input preamp, power amp, cabinet, reverb, effects loop, and output.
The two amps can be configured in three modes, from fully parallel to 2-channel or dual mono, and the tones can range from pure clean to high gain.

■Main Features
Two completely independent A/B amp channels.
Each channel has a preamp, power amp, and cabinet type selector.
Dual FX loop send/return
Dedicated stereo thru outputs
Stereo reverb with 3 modes (Room, Ether, Plate)
Power amp simulation with power amp type, power amp drive, presence, and resonance on each channel.
Cabinet simulation with cab type and speaker color for each channel.
Two balanced DI outputs with ground lift.
Headphone amplifier with volume control.
Auxiliary input routable to main outputs or headphones only.
Three operating modes (full parallel, 2-channel with stereo cabinet simulator, and 2-channel dual mono).
Mono loop switch for routing mono FX to both returns.
Two 1.4” outputs with cab bypass option.
Footswitchable channel selection (footswitch included).

■SPEC
Durable custom-made anodized aluminum case with sandblasted/frosted black finish.
Weight: 490 grs (1 lb)
Dimensions: 125 x 105 x 65 mm
Voltage: 9 to 12V DC stabilized
Connector: 2.1 mm DC jack, center negative
Current consumption: 200 mA
Recommended supply current: 250 mA min.
Input impedance
Input: 1M Ohm L & R return: 1M Ohm
Output Impedance: 1K Ohm
Transmit: 1K ohms
Unbalanced Output: 4.7K Ohms
Balanced Output: 100 Ohms

Headphone Amplifier Specifications
Power: 135 mW at 32 ohms.
* For use with 16, 32, 64, and 96 Ohm headphones.
* Power loss may occur with high impedance headphones.