DYNACORD / V600:2

DYNACORD / V600:2 is a 600W power amplifier featuring powerTANK technology.

■2ch power amplifier
■300Wx2

The V600:2 is a 600W power amplifier with powerTANK technology that provides flexible total power delivery through two channels.
This amplifier is ideal for background music and clear voice announcements in environments such as:

bar, restaurant
retail store
education
church
museum, art gallery
Transportation facilities
conference center

・powerTANK 2-channel amplifier with a total capacity of 600 W (300Wx2)
Variable load drive (VLD) that provides the same power into 4 Ω, 8 Ω, 70 V, and 100 V
・Significantly reduce power consumption with ecoRAIL and APD
・dualCOOL convection cooling with additional intelligent fan for extreme temperature conditions
・Comprehensive protection package for reliable operation

■powerTANK
The powerTANK is a store of available amplified power, which is flexibly utilized through the amplifier's two channels. powerTANK adapts to the requirements of each zone or output without the hassle of manually configuring individual channels, so no setup is required.

■Variable load drive
Variable load drives (VLDs) ensure that the powerTANK's power capacity is utilized efficiently, providing consistent power to any channel of any impedance.

■dualCOOL
The dualCOOL thermal design means that while the amplifier normally operates as a convection cooled amplifier, it also has an intelligent variable speed fan for extreme temperature conditions. This ensures the amplifier has the highest performance and reliability in all applications.

■ecoRAIL
ecoRAIL provides an audio output suitable for background music levels, although power consumption is similar to normal standby levels. Auto Power Off (APD) mode can also be used to further reduce power consumption to less than 1 watt when no signal is detected for an extended period of time.

■Line input
Single cable installation feature is compatible with AES72-1E (RJ45 connector) wired devices. This solution allows easy installation of both channels without having to wire all connections individually.

■PFC power supply
This amplifier features PFC power and protection features normally reserved for professional power amplifiers, avoiding complete shutdown and ensuring peak performance under any conditions.

Design and technical specifications
The 2-channel amplifier has a total power of 600 W and can adapt the power of the output channels by sharing power in either 4Ω, 8Ω, 70V or 100V conditions on any channel simultaneously. The amplifier's enclosure is designed to be a 19” rack unit size 1-2. The amplifier has a thermal design that allows it to operate as a passive cooling device, but can also operate with forced air cooling if required under harsh conditions to not reduce available power. The safe operating temperature range of the device is -5 °C to +45 °C without reduction or shutdown. The amplifier has a 1W It has an automatic power-off mode that can be switched on and off with less than 100% standby power consumption. It also has a low power consumption feature that significantly reduces power consumption while maintaining output modulation suitable for background music. The amplifier can be connected to audio equipment as an input or through other devices using the AES72-1E wiring protocol. It includes protection features to ensure reliable and safe operation, including (HFL), output current limiter (OCL), rail supervisory limiter (RSL), high frequency protection (HFP), DC protection (DCP), overcurrent protection (OCP), mains fault protection (MFP), output balance protection (OBP), overtemperature protection (OTP), and overvoltage protection (OVP).