flyingteapot / GOLD AXE Limited

flyingteapot has released a boutique OD pedal that is a true classic! This limited edition pedal is made using all through-hole parts and hand-soldered. It also uses germanium diodes, op-amps, and knobs that are more difficult to obtain and more expensive than those used in the standard version. This is a pedal that is packed with attention to detail for enthusiasts!

About the Limited Edition
We have prepared a special limited edition version of this product. In the process of developing this product, we cut out unnecessary details in order to reduce costs, but we have deliberately not done this, and have produced a model with specifications that could be considered wastefully luxurious.
Specifically, the limited edition uses all through-hole parts and is hand-soldered. It also uses germanium diodes, operational amplifiers, and knobs that are more difficult to obtain and more expensive than those used in the standard edition.
This is not a model that differentiates itself from the standard edition in terms of sound. It has the same sound concept and basic performance, but we hope you will enjoy it as a unit packed with the kind of attention to detail that is aimed at enthusiasts.

■Controls
・Output
・Treble
・Gain

■Three toggle switches
Bottom: Controls the amount of low-mid, allowing you to go from a vintage-style fat sound to a modern, clear sound. This also allows you to create a sound with good definition without having to turn up the treble too much.

Presence: By controlling the high-frequency range even more than the treble, you can control the range that affects the attack feel to suit your equipment. You can create a sound that suits both Les Paul and Stratocaster. You can also get a boost effect focused on the mid-range by actively cutting the high-frequency range in combination with the treble control.

Clipping: By switching the clipping element, you can select between a sharp distortion sound and a wide-range sound when the gain is increased. The Vintage mode uses a germanium diode, just like the real thing.

■SPEC
Size: 99 x 140 x approx. 50mm (including knobs)
Weight: 430g
Current consumption: 30mA or less
(Powered by a 9V DC power supply with a center minus polarity, or by a 9V dry cell battery using a DC jack. Battery snap not included)