BEHRINGER / PPA2000BTSET1

This is a great value set that includes PPA2000BT, CWS802M wireless microphone x 2, microphone stand x 2, and speaker stand x 2. PPA2000BT is a simple PA equipped with a Bluetooth receiver and an 8ch powered mixer with a maximum output of 500W (8Ω) x 2. It is easy to set up and is safe for beginners. Recommended for small-scale situations such as mini-lives in classrooms, karaoke, and acoustic events.

■BEHRINGER / PPA2000BT EUROPORT Portable PA System
Maximum output: Stereo output 1000W+1000W (4Ω), 500W+500W (8Ω)
System frequency response: 50Hz to 22kHz
Speaker: 10 inch woofer, 1 inch driver
Inputs: 4 mic/line, 2 stereo inputs, stereo AUX input (6.3mm x 2, 3.5mm stereo connector)
Channel EQ: HIGH/LOW
Output: SUB OUT: 6.3mm x 1 (for active subwoofer), RECORDING OUT: RCA, SPEAKER OUT: 6.3mm x 2
Each channel adjustment: BASS, TREBLE, EFFECT, PAN, LEVEL
+48V phantom power supply available
Equipped with 24bit multi-effector. 100 presets including reverb, delay, etc.
Equipped with 7 band graphic equalizer
Equipped with pole socket (35mm)
Dimensions: Approximately H66 x W35.4 x D88.3cm (dimensions when packed)
Weight: Approximately 31kg (packed)
accessories:
・Dynamic microphone with switch (XM1800S) x 1
・Microphone cable x 1 (approx. 6m)
・Speaker cable x 2 (approx. 6m)

The stereo output and speakers are equipped with a high-quality 10-inch woofer and 1-inch driver, and are fully equipped with professional functions such as 7-band EQ and 100 preset effects.
The 7-band EQ is equipped with a feedback detection function FBQ, which provides sufficient countermeasures against feedback, and +48V phantom power is also included, so DI and condenser microphones can also be used.
Since it is compatible with Bluetooth, you can play the sound source on a computer or tablet as long as it is equipped with the device.
Comes with 2 speaker cables and 1 high quality dynamic microphone with switch (XM1800S) microphone cable.
Mixer, speakers, cables, etc. can be packed in it for compact storage and portability.

■CLASSIC PRO / CWS802M Wireless Microphone Receiver & Dual Hand Microphone

Band used: 800MHz
Number of receiving channels: 2ch
Number of simultaneous uses: 6 waves
Antenna method: diversity
Antenna input: 50Ω
Audio output connector: Phone, XLR
Reach distance: Approximately 90m (Note: The reach distance of radio waves varies depending on radio wave conditions, presence or absence of reflection or interference, and transmission power)
Power supply: Receiver: DC12V (supplied by included adapter), Hand microphone: DC3V (1.5V AA battery x 2)
Dimensions: Receiver: 400x42x183mm, Hand microphone: 54φx260mm
Mass: receiver: 1740g, hand microphone: 234g
Accessories: Antenna x2, power adapter, rack ear x2, cable included (XLR female phone) x2
remarks:
・Select one channel to use from among the 30 B-band channels. Up to 3 sets (6 waves) can be used in the same area.
・Maximum reach distance: Approximately 90m (Note: Radio wave range varies depending on radio wave conditions, presence or absence of reflection or interference, and transmission output)
-The microphone is equipped with a dynamic capsule suitable for vocals.
・The channel sync button is also placed in an easy-to-see position. It's easy to mute with the switch at hand.
- The receiver's LCD screen now displays characters more clearly and is easier to read. (Equipped with VA LCD)

◆Receiver CW802R
Reception frequency: UHF806.125~809.750MHz
Case: Compatible with 19-inch EIA standard rack mount (metal housing)
Transmission method: PLL frequency synthesizer method
S/N ratio: >100dB
Spurious response: 70dB (minimum value)
Receiving sensitivity: 52dB
AF response: 80Hz-18kHz
T.H.D:＜1%(at1kHz)
Dynamic range: >100dB
Tone signal: 32.768kHz
Audio output: Balanced XLR, unbalanced phone
Power supply: DC12V, current consumption: 520±10mA

◆Handheld transmitter (CW800M x 2)
Transmission frequency: UHF806.125~809.750MHz
Channel settings: SYNC
Display: LCD display shows channel, battery level
RF power: 10mW (max)
Frequency stability: ±0.005%
Spurious radiation: >60dB
Gain: 0dB, -10dB, -20dB
Battery: DC3V (1.5V AA batteries x 2), current consumption: 120±10mA

■CLASSIC PRO / MSB/BLACK boom microphone stand x 2
boom mic stand
Dimensions: Height 900-1,600mm
Boom length 825mm
Size when legs are opened: φ700mm
Weight: 2.4kg
Thread diameter: 3/8 inch (AKG standard) to 5/8 inch (SHURE standard) conversion adapter included

■K&M / 85070-000-55 Microphone holder large x 2 items
microphone holder
Compatible diameter: 34-40mm
Microphone holder for large wireless microphone
Can be attached to microphone stands with 5/8 inch and 3/8 inch thread diameters

■CLASSIC PRO / SPS/BLACK speaker stand x 2
Height (when leg width is 136cm): 135/145/155/165/175/185cm
(When leg width is 55cm): 123/133/143/153/163/173cm
Dimensions vary depending on the width of the legs.

Load capacity: 60kg
Pole diameter: 35mm
Weight: 3.75kg
Color: black
Storage dimensions: W110*D14:H14cm

*Replacement parts are not sold separately.