PAIGE CAPO / PC-6Z-ETI

The Clik ETI (Enhanced Tone Innovation) is easily adjusted with one hand, has an advanced quick-release button, and can be stored behind a nut when not in use.

In addition, the Paige Click ETI features a patented bar system.
Essentially, the bar acts like a nut that needs very little tightening.
This greatly reduces the need to re-tune when moving the capo.
The bar system consists of special inserts made of a nut-like material that are individually molded for each string.
Each insert has a radius that ensures the string is always centered, even after the string is bent.
Underneath the individual pieces is a rubber cushion that allows for even pressure and adapts to the radius of the fingerboard.
The result is a more natural, brighter sound and buzz-free sustain, as if no capotasto were used.
You no longer have to worry about your guitar going out of tune while maintaining excellent sustain.
This capotast is made deep enough to go over the nut of most electric guitars and wide enough to reach the 6th fret of most electric guitars.
If you need a capotast after the 6th fret, please contact us for a special order.

Features:

Unique patented design
Controllable tension
No buzzing or muted strings
Quick and easy to move
Stores conveniently behind the nut
ETI Bar
Usage:

Make sure the capo screw is turned to the fully open position, place the capo on the fretboard, and secure the clip.
Press the screw to tighten the capo.
Turn the screw to adjust the accuracy.
Do not overtighten!
Loosen the knob screw 1/4 turn before releasing the click release button. This will relieve tension and extend the life of the release mechanism. A “click” here will indicate full release.
Can be stored behind the nut when not in use.
Size:

Inside Width: 1 7/8” (1.875)
Opened Depth: 1 1/8” (1.125)
Closed Depth: 11/16” (.687)
Radius: The radius of the bar is exactly 10” and fits most electric necks.